The Rexroth R911266354 (KDA 3.3-150-3-A0I-U1) is a drive controller specially tailored for the control of Indramat motor speed and positioning. For optimum functionality, it must be stored in a dry, dust-free, and shock-free environment between -30 and 85 degrees Celsius. If there's potential for vibrations during transit, a shock-absorbing base is advised. The product comes with an accessories kit which includes a mounting panel for the drive, and an external heatsink blower for the control enclosure's back panel. It's necessary to install the AS3 module on the drive before mounting within the control enclosure, and this process conducted by trained professionals. The drive supports a 10Volt analog speed command value, alongside one auxiliary interface for incremental encoder output, but lacks an auxiliary encoder. It produces a rated output of 150 Amps which depreciates when operating above 45 degrees Celsius or at altitudes above 1000 meters. Exceeding the recommended operating conditions of 4-45 degrees Celsius and 1000 meters altitude can result in drive damage. Weighing 17.4 kilograms, this IP 10 rated drive is to be fitted inside an appropriate industrial enclosure.
Storage Conditions: Dry, Dust and Shock Free Storage Temperature Range: -30 to 85 degrees Celsius Recommended Usage: Position and Speed Control of Indramat Motors Included Accessories: Mechanical Accessory Kit and Blower Required Installation Stage: AS3 module installation before drive mounted Speed Command Value: Analog 10 Volts Auxiliary Encoder: Not Available Auxiliary Incremental Encoder: Available Rated Output: 150 Amps Output Derating Temperature: Above 45 degrees Celsius Maximum Derating from Temperature: 20% at 55 degrees Celsius Altitude Derating: Above 1000 meters Maximum Derating from Altitude: 35% at 5000 meters Weight: 17.4 kilograms Protection Class: IP 10 Recommended Installation: Inside a Suitable Industrial Enclosure