VT-VSPA2-50-1X-T1-001
VT-VSPA Proportional Amplifiers
To function properly, the device's solenoid cables should be short-circuit-free. It is designed with a measuring socket located on the front panel and characterizes a low current uptake of less than 1.2A. The user can manually adjust some of its jumper settings, while others remain factory-set. Importantly, the device should not employ plugs with freewheeling diodes to operate its solenoids.
This product operates on an internal power supply but may showcase a residual ripple current for control voltage when external control is applied. It adheres to DIN 41494 specifications – designed as a Euro-card and outputs less than 1V during a fault state. For optimal performance, a safe distance of 1m from aerial lines and radio equipment is advised. Lastly, the amplifier comes with a one-year back-up support.
Technical Specifications
Product Type
Valve Amplifier
Enable Input
LED Lamp
Feature
Step Function Generator
Command Value Indicator
H1 to H4 LEDs
Direct Command Value Input
0V to +/-6V Voltage Rating
Call-up Relays
6
Command Values
4
Enable Input Signal
More than 8.5V
Safety Feature
Check for No Short Circuit of Solenoid Cables
Measuring Socket
One on Front Panel
Current Consumption
Less than 1.2A
Power Supply
Integrated
User Interface
Jumpers (Some User-Configurable, Some Factory-Set)
Restriction
No Plugs with Freewheeling Diodes for Solenoids
Logistics
Shipped through FedEx or DHL
Residual Ripple Current Control
Possible with External Control
Charging Current
On Smoothing Capacitor
Design Standard
Euro-card, DIN 41494 Specifications
Output Signal During Fault
Less than 1V Voltage
Fax: 1-919-867-6204
Shipping & Payment Options
Warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the VT-VSPA2-50-1X-T1-001.
Exchange
Want to sell your VT-VSPA2-50-1X-T1-001?
