PPC Controllers | Indramat Controls
1070170294 (PPC-R22.1N-T-NN-P1-NN-FW)
Request a quote
Description
Rated 4.9 with 7 reviews
The Bosch Rexroth 1070170294 (PPC-R22.1N-T-NN-P1-NN-FW) CNC module boasts a fiber optic transmitter, receiver, and an H2 distortion display through its SERCOS interface. The module includes a socket for firmware while also accommodating three auxiliary sockets for axis processor modules, extending to eight additional drives. The dual rack strictly serves for assembly. It is required to be fitted vertically in the switch cabinet with the RECO unit. The module has an operating temperature threshold from 0°C - 45°C, an ambient pressure of 86kPa to 106kPa, and relative humidity scalability of 10% - 95% excluding condensation. In addition to three digital inputs and two outputs, the unit incorporates an 11-pin Phoenix connector and a protected, ready-for-operation relay. Provided CPU firmware allows for a plethora of functions from tool management to PLC communication. This product also meets EMC requirements for drive and control mechanisms. Shipment is covered by a one-year warranty through a reputable network.Specs
Fiber Optic Receiver: Yes
Fiber Optic Transmitter: Yes
H2 Distortion Display: Yes
Firmware Module Socket: Yes
Optional Sockets: 3
Axis Processor Module: Can fit 8 additional drives in each socket
Rack Function: Assembly only
Module Carrier Position: Vertical orientation
Fuse Requirement: Maximum 4A with delay action for 24V
Operating ambient temperature: 0°C - 45°C
Atmospheric Pressure Range: 86kPa to 106kPa
Relative Humidity: 10% to 95% during operation
Digital Inputs: 3
Digital Outputs: 2
Phoenix Socket: 11-Pin X11 Connector
Data Transfer Type: Application dependent
Operational Environment: Not underwater
Operator Requirement: Trained and qualified personnel
EMC Requirements: Must be met for installation
Maximum Voltage During Operation: Unspecified
Shipping: Available through reputed network
User safety: Risk of injury if improperly handled.
Fiber Optic Transmitter: Yes
H2 Distortion Display: Yes
Firmware Module Socket: Yes
Optional Sockets: 3
Axis Processor Module: Can fit 8 additional drives in each socket
Rack Function: Assembly only
Module Carrier Position: Vertical orientation
Fuse Requirement: Maximum 4A with delay action for 24V
Operating ambient temperature: 0°C - 45°C
Atmospheric Pressure Range: 86kPa to 106kPa
Relative Humidity: 10% to 95% during operation
Digital Inputs: 3
Digital Outputs: 2
Phoenix Socket: 11-Pin X11 Connector
Data Transfer Type: Application dependent
Operational Environment: Not underwater
Operator Requirement: Trained and qualified personnel
EMC Requirements: Must be met for installation
Maximum Voltage During Operation: Unspecified
Shipping: Available through reputed network
User safety: Risk of injury if improperly handled.
Shipping
In Stock, Ships 2-3 Days | Warranty | Shipping | Repairs | Exchange |
|---|---|---|---|
| 1 Year Indramat USA Warranty included | Worldwide shipping via UPS and Fedex | We offer repair service for the 1070170294 in 10 days. | Exchange credit for your defective unit available. |
