PPC Controllers | Indramat Controls
R911170719 (PPC-R22.1N-T-Q1-G2-NN-FW)
Request a quote
Description
Rated 4.8 with 10 reviews
The Bosch Rexroth R911170719 (PPC-R22.1N-T-Q1-G2-NN-FW), a multi-axis motion and logic control device, should be installed upright in slot 00 of the RMB rack, ensuring sufficient clearance for heat dispersal. It features a Phoenix connector (X1), capable of a 1.5mm2 cable section and has two digital outputs and three digital inputs. It also autocorrects to mitigate supply voltage reductions below 20VDC. The X1 connector functionality is reliant on pins 6 and 7 maintaining a 24V rating. The device supports a 10/100 MBaud EtherNet interface, has a four-digit alphanumeric matrix display (H1), two 15-pin PROG and COM interfaces and troubleshooting capacities through error codes. Firmware updates must be conducted by trained personnel. This device can host one fieldbus master and one fieldbus slave interface and is compatible with manufacturer’s human-interface units. Global delivery includes a one-year warranty.Specs
Installation Orientation: Upright
Installation Position: Leftmost slot or slot 00
Cable Cross-Section: Up to 1.5mm2
Power Connector Type: Phoenix X1
Digital Outputs in Phoenix X1: 2
Digital Inputs in Phoenix X1: 3
Auto Shutdown Voltage: Below 20VDC
Required Power Supply Inrush Current: At least 20A
Connectivity: 10/100 MBaud EtherNet interface
Serial Port Interfaces: 2 (PROG and COM with 15 pins each)
Display Type: Four-digit alphanumeric matrix (H1)
Error Display: Three-digit code preceded by the letter E
Memory: Loaded on compact flash memory card
Fieldbus Interfaces Supported at a time: One master and one slave
Human-Machine Interface Unit Support: Yes
Delivery: Worldwide
Installation Position: Leftmost slot or slot 00
Cable Cross-Section: Up to 1.5mm2
Power Connector Type: Phoenix X1
Digital Outputs in Phoenix X1: 2
Digital Inputs in Phoenix X1: 3
Auto Shutdown Voltage: Below 20VDC
Required Power Supply Inrush Current: At least 20A
Connectivity: 10/100 MBaud EtherNet interface
Serial Port Interfaces: 2 (PROG and COM with 15 pins each)
Display Type: Four-digit alphanumeric matrix (H1)
Error Display: Three-digit code preceded by the letter E
Memory: Loaded on compact flash memory card
Fieldbus Interfaces Supported at a time: One master and one slave
Human-Machine Interface Unit Support: Yes
Delivery: Worldwide
Shipping
Call For Quote | Warranty | Shipping | Repairs | Exchange |
|---|---|---|---|
| 1 Year Indramat USA Warranty included | Worldwide shipping via UPS and Fedex | We offer repair service for the R911170719 in 10 days. | Exchange credit for your defective unit available. |
