The R911307609 (PPC-R22.1N-T-N1-NN-NN-FW) is a motion/logic controller with built-in Ethernet, able to support both Ethernet/IP slave fieldbus and standard TCP/IP. With three expansion slots, one of which is pre-installed with a programmable limit switch (PLS), it can be connected to a maximum of forty digital drives via the SERCOS interface. Compatible drives include Rexroth IndraDrive, DIAX 04, and EcoDrive 03. Programming and configuration are facilitated through the VisualMotion Toolkit software from Bosch Rexroth, connecting via a serial programming interface (RS 232/422/485). Built on a Power PC processor with 8MB of RAM and 256 bytes of EPROM, the controller also boasts a four-digit display and several digital inputs/outputs. The R911307609 (PPC-R22.1N-T-N1-NN-NN-FW)'s IP 20-rated housing measures 214 x 83.7 x 165 millimeters, and operates within a temperature range of 0-45°C on a DC input of 19.2-30V.
Type: Motion / Logic Control Expansion slots: 3 Factory fitted module: PLS master module Memory module: Not Available Maximum digital drives connection: 40 Programming software: VisualMoton Toolkit Programming interface: RS 232 / RS 422 / RS 485 Processor: Power PC RAM: 8 megabytes EPROM: 256 bytes Display: Four-digit front panel Digital inputs: 3 Digital outputs: 2 Measurement: 214 x 83.7 x 165 millimeters Weight: 2.87 pounds Storage temperature: -25 to 70 degrees Celsius Operating temperature: 0 to 45 degrees Celsius DC input range: 19.2 to 30 Volts DC
PPC R22.1N-T-N1-NN-NN-FW PPC.R22.1N-T-N1-NN-NN-FW PPCR22.1N-T-N1-NN-NN-FW PPCR221NTN1NNNNFW PPCR22.1NTN1NNNNFW PPC R22.1N T N1 NN NN FW