The Bosch Rexroth R911309367 (PPC-R22.1N-T-Q2-NN-NN-FW)CNC module is part of the MTC200 line and falls under the PPC series. Complying with EN 60529, its IP 20-rated structure is designed to be housed safely in a switch cabinet alongside an RMB02.2 sub-rack. This dual-width unit contains an in-built axis and a CNC processor system. Notably, its diagnostic process can be done via a serial COM port. The device, which requires vertical installation, occupies two slots on the module rack and needs external firmware and hardware for operation. The firmware is stored in a 4MB flash memory PSM module. Its power supply has a rated value of 24VDC and maximum consumption of 1.2A at 24VDC. The device’s interface ports and BT bus connection are user-restricted to prevent damage, injury or electric shock. However, it comes with a one-year warranty, assuring users of its quality and longevity.
Product Group: MTC200 Protection Class: IP20 according to EN 60529 Required Installation: Inside a switch cabinet with RMB02.2 sub-rack Axis Processor: Integrated Unit Type: CNC processor system with double-wide housing COM Port Included: Yes Positioning: Only vertical Dimensions: 83.7 x 182 x 150mm (W x H x D) Line Code: 2 Module Size: Extends over two module slots Control Unit: MTS-R01.2 Required For Operation: Firmware and additional hardware components Power Supply: Rated value of 24VDC Power Consumption: Maximum of 1.2A at 24VDC Accessibility to COM, PROG Serial Interfaces, BT Bus Connection: Not Accessible
PPC R22.1N-T-Q2-NN-NN-FW PPC.R22.1N-T-Q2-NN-NN-FW PPCR22.1N-T-Q2-NN-NN-FW PPCR221NTQ2NNNNFW PPC R22 1N T Q2 NN NN FW ppc-r22.1n-t-q2-nn-nn-fw PPCR22.1NTQ2NNNNFW PPC R22.1N T Q2 NN NN FW