SYHNC-SEK-23/M-24-0-C-E24-A047
VT-HNC Digital Axis Controllers
The SYHNC-SEK-23/M-24-0-C-E24-A047 is a rack-mounted digital axis controller produced by Bosch Rexroth Indramat for the VT-HNC Digital Axis Controllers series. It provides closed-loop processing for hydraulic axes, translating motion commands into electrical signals that coordinate position control in industrial automation systems. The board slides directly into a rack-mounting frame, allowing installation without disturbing the backplane wiring.
The controller has four differential analog inputs that accept either voltage or current feedback, and the differential wiring helps cancel electrical noise commonly generated around pumps and manifolds. Command references leave the board through two voltage/current outputs and two voltage outputs, so two channels can drive current-controlled devices while the other two provide voltage setpoints for servo amplifiers. Discrete logic arrives through 24 digital inputs, and machine states are returned through 24 digital outputs, allowing a PLC to monitor limits, valves, and sensors connected to the axis. A CANopen network port links the controller to higher-level devices for parameter transfer and status exchange without extensive parallel wiring. The electronics operate from 18 to 36 VDC, supporting battery-buffered or redundant 24 V power rails commonly used in control cabinets.
The controller coordinates two hydraulic axes, keeping both position loops aligned with the same internal processing cycle during synchronized motion. When millivolt bridge sensors are used, four impedance converter inputs condition their signals internally and eliminate the need for external signal amplifiers. Linear feedback elements connect through the IW9 evaluation stage, which supports transducers with a 9 mm stroke and is suitable for short-stroke cylinders used in clamping or indexing applications. Nonoperational storage is permitted from -20 to +70 °C, allowing spare modules to remain in unconditioned warehouses or transport environments within this temperature range.
Technical Specifications
Analog Inputs
4 Differential Inputs (Voltage Or Current)
Analog Outputs
2 Voltage/Current + 2 Voltage
Axis Version
Version for 2 hydraulic axes
Bus Connection
CANopen
Digital Inputs
24
Digital Outputs
24
Impedance Inputs
4 Impedance Converter Inputs
Installation Type
Rack Mounting
Operating Voltage
18 to 36 VDC
Position Transducer Eval
IW9, 9 mm Stroke
Storage Temperature
-20 to +70 °C
Frequently Asked Questions
What type of bus connection is available on the SYHNC-SEK-23/M-24-0-C-E24-A047?
The SYHNC-SEK-23/M-24-0-C-E24-A047 controller supports CANopen for its bus connection.
How many analog input channels does the SYHNC-SEK-23/M-24-0-C-E24-A047 have, and what type of signals do they accept?
This axis controller features 4 differential analog inputs that can accept either voltage or current signals.
How many digital inputs and outputs are available on the SYHNC-SEK-23/M-24-0-C-E24-A047?
The controller provides 24 digital inputs and 24 digital outputs for versatile signal interfacing.
What installation method is required for the SYHNC-SEK-23/M-24-0-C-E24-A047?
This model is designed for rack mounting, making it suitable for control cabinet installations.
What is the required operating voltage range for the SYHNC-SEK-23/M-24-0-C-E24-A047 controller?
The operating voltage for this controller ranges from 18 to 36 VDC.
Internal Product Review
The SYHNC-SEK-23/M-24-0-C-E24-A047 is a VT-HNC digital axis controller designed for 2 hydraulic axes with CANopen connectivity. Rack mounting and an 18 to 36 VDC operating range make integration straightforward in demanding hydraulic control cabinets. A well-balanced I/O set with 24 digital inputs and 24 digital outputs makes the unit especially capable for coordinated machine control.
Shipping & Payment Options




Warranty
Repair
We offer a repair service for the SYHNC-SEK-23/M-24-0-C-E24-A047.
Want to 




