VT-HNC100-1-1X-230-8

Description

The VT-HNC100-1-1X-230-8 is a digital axis control by Bosch Rexroth, designed to synchronize control for a single axis. Its robust design is compatible with electrohydraulic and electromechanical drives and programmed using an NC language with conditional jumps and subprogram technique. However, all repairs should only be conducted by the manufacturer’s service personnel. The device's performance can be compromised by moisture, dirt, fluid accumulation and incorrect placement of connection lines. Care is needed to avoid water condensation within the housing which could cause short-circuiting. The unit should not be assembled using adhesives or silicones, and the voltage supply's supply and return lines must be passed together. Correct functioning depends on the signal and load lines not being parallel. If control signals display a fault, other devices in the drive system must be checked. This unit is safely mounted on the control cabinet's earthing system through specified mechanical control points. It employs a 15-pole, high-density HD-Sub connector to link the control housing and the cable shields. If a 24V transducer supply is directly implemented, the control should adhere to the transducer's specification. This product comes with a year's backup support from Indramat USA and can be shipped globally.

---