XFE01.1-FB-04

The XFE01.1-FB-04 network interface module is produced by Bosch Rexroth Indramat for use within the XM21 IndraControl Systems series. By offering PROFINET and EtherNet/IP connectivity, it equips an XM21 controller with real-time Ethernet links that tie field devices to supervisory automation layers. Two RJ45 connectors on the front panel establish these data paths, allowing deterministic communication in motion, safety, and general I/O applications across the plant floor.

The unit draws its control power from a nominal supply of 24 V DC supplied through the XD1 4-pin connector, and diode-based reverse-polarity protection guards the electronics against wiring errors. Maximum current consumption is limited to 0.2 A, which results in a peak internal demand of 4.8 W. An internal protective fuse rated at 4 A opens under fault conditions, while functional insulation between terminals Xf40 and Xf41 withstands 1200 V DC for one minute. The plastic housing carries an IP20 degree of protection, requiring cabinet installation to keep finger-size objects and dust out of live parts.

Environmental ratings match typical cabinet conditions: contamination level 2 and overvoltage category 2 define low-pollution, low-energy installation classes. The module starts reliably at temperatures down to -25 °C and remains within specification up to 60 °C. Operation is permissible with ambient humidity as high as 95 %, provided condensation is avoided. With a mass of only 0.17 kg, the device imposes minimal load on DIN-rail hardware, simplifying dense layouts of IndraControl components. Wake Industrial can arrange international shipping options for this product. The XFE01.1-FB-04 also comes with Wake Industrials one year warranty. For questions regarding type codes, faults, and specifications the free chat tool available on the website can assist with basic troubleshooting.