XM2100.01-01-31-31-001-NN-100N3NN

The XM2100.01-01-31-31-001-NN-100N3NN is a compact control platform produced by Bosch Rexroth Indramat for the XM21 IndraControl Systems series. It serves as a programmable automation controller that coordinates motion, logic, and communication tasks on factory floors, allowing drives, I/O, and machine interfaces to be handled from one embedded unit.

An Intel Atom E620 600 MHz processor executes control tasks, while 512 MB of on-board RAM maintains real-time data and program code. The electronics operate from a nominal supply of 24 V DC (SELV/PELV), matching common cabinet power rails. Motion is synchronized through the Sercos bus; its minimum cycle time of 250 µs supports high-precision axes, and 2 (Master/Slave) Sercos interfaces permit either line or ring topologies. The housing measures 100 mm in width, 126.3 mm in height, and 74.1 mm in depth, so the controller can fit alongside standard DIN-rail components without exceeding typical enclosure depths.

For machine networking, the integrated Gigabit port moves deterministic traffic at 1 Gbit/s. Maximum power draw is limited to 36 W, helping designers size supply units and thermal management. The enclosure is rated IP20 and assigned to Protection Class III, so the device must be installed inside a safe low-voltage area but needs no earth connection. A front slot accepts SD media of at least 1 GB for recipe storage and firmware images, and separate USB connectors—one device and one host—support service tools or local peripherals. Field technicians can mount the unit single-handedly because it weighs only 0.68 kg, reducing strain when populating large control panels.