The CSB01.1C-S3-ENS-EN1-NN-S-SS-FW is a basic single-axis control section from Bosch Rexroth, custom-configurable to meet specific requirements. Integral to the drive controller, this compact device allows for limited plug-in actions. It features a SERCOS III module, an Ethernet-enhanced version of the SERCOS 2 interface, and complies with IEEE 802.3u 100Base-TX standards for the S3 module. The unit utilizes a 15-pole female D-Sub connector for the IndraDyn/Hiperface/1 Vpp/TTL encoder module, and carries out standard encoder evaluation with a typical supply voltage of 11.6 V. The device assists the drive controller in monitoring and managing motor operation. Note that only trained personnel are permitted to operate this product. Extreme caution must be exercised in handling as exposure to unsuitable conditions and improper handling can lead to device damage. It's crucial to read and comprehend its associated documentation before use. Be aware of potentially hot surfaces during and after operation and ensure the emergency stop switch is in working order before commissioning. A grounding connection is also requisite for the safe application of this unit.
Axis Count: Single Configurable: Yes Part of Drive Controller: Yes Size: Smaller than power section Plug-In and Removal Actions: Limited SERCOS III Module Function: Ethernet based variant of SERCOS 2 100Base-TX Compatibility: IEEE 802.3u standards for S3 module Safety Option: None Connector Type: 15-pole female D-SUB Encoder Type: IndraDyn / Hiperface / 1 Vpp / TTL Encoder Supply Voltage: 11.6 V Design: SS Product Condition: Original State Only Ambient Conditions: Specified Conditions Only Surface Temperature: Hot during and briefly after operation Grounding Connection Required: Yes Commissioning Requirement: Ensure emergency switch working Operation Restrictions: For use by Qualified and trained personnel only.