The Bosch Rexroth R911257401 (DDC01.1-K200A-DL02-00) current drive is a dynamic and precise three-phase, single-axis positioning controller. It enables digital control, monitoring, diagnostics, and parameterization through a signal processor. The positioning module allows user-oriented programming with up to 3,000 program blocks, including input queries, speed and position entries, output settings, and more. The system requires connection to a 3 x 280 to 460VAC, 50 to 60Hz mains for the supply module. It comes with an integrated mains rectifier, bleeder resistor, and one-year warranty. Program blocks represent specific input states or monitored motion sequences. It has a 34-pin and a 9-pin D-sub plug-in connector on the front panel. Parameters for drive-specific functions are stored within the connected MDD motors for activation during commissioning. Auxiliary plug-in modules in U1 to U4 slots may include input/output interfaces or interbus S interface modules. The product provides IP 65 protection.
Type: Three-phase drive Control method: Digitally through signal processor Programming Language: User-oriented Program Blocks: Up to 3,000 Supply Module connectivity: Directly to a 3 x 280 to 460VAC, 50 to 60Hz mains Included Component: Mains rectifier Bleeder Resistor Location: In basic unit Auxiliary Modules Location: In U1 to U4 slots of basic unit Parameters Storage: In the feedback of MDD motors Degree of Protection: IP 65 Transport: Possible through reputed logistics partners.