DDC Digital Intelligent Servo Drives | Indramat Drives
R911264406 (DDC01.1-K150A-DS01-01)
Rated 4.5 stars (14 total reviews)
Call For Quote
Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping
1 Year Warranty Included
Free Ground Shipping
Or speak to a sales representative for additional information:
Phone:
1-888-551-3082
1-888-551-3082
Email:
[email protected]
[email protected]
Description
The Bosch Rexroth R911264406 (DDC01.1-K150A-DS01-01) servo drive has a DS01-01 configuration label and offers a maintenance-free operation. It features a motor feedback cable connected at the top and primary power, motor power, and blower connections at the bottom. The X2 connector has an RS 232 interface for linking to a VT-100 or PC terminal. Additional features include a fault reset key, slots for a command interface card, and auxiliary plug-in modules. The drive, intended for installation in machines like sequential finishing machines and transfer facilities, boasts a reliably interference-free operation. However, distinct grounding requirements, proper distance between the power cables and control, and signal leads are necessary for optimal operation. Before starting the drive, programming the parameters related to the drive and DLC module is required. The product comes with a one-year warranty and global shipping.
Configuration Designation Code: DS01-01
Motor Feedback Cable Location: Top of device
X2 Connector: Features a RS 232 interface
Motor, Mains, and Blower Connection Location: Bottom of the drive
Feature: Fault reset key
Command Interface Card and Auxiliary Plug-in Modules: Located at bottom half of front panel
Interference: Mostly insusceptible
Ground Connection Required: Yes
Routing Distance for Control and Signal leads and Power Cables: At least 10cm
Must route cables separate: Yes
Motor associated with product earthed to drive controller: Required
Parameter Programming: Before start
Leakage Current: More than 3.5mA
Safety Precaution: Never touch electrical contacts during operation
Display H1: Shows AF message when powered ON
Motor Feedback Cable Location: Top of device
X2 Connector: Features a RS 232 interface
Motor, Mains, and Blower Connection Location: Bottom of the drive
Feature: Fault reset key
Command Interface Card and Auxiliary Plug-in Modules: Located at bottom half of front panel
Interference: Mostly insusceptible
Ground Connection Required: Yes
Routing Distance for Control and Signal leads and Power Cables: At least 10cm
Must route cables separate: Yes
Motor associated with product earthed to drive controller: Required
Parameter Programming: Before start
Leakage Current: More than 3.5mA
Safety Precaution: Never touch electrical contacts during operation
Display H1: Shows AF message when powered ON
DDC01.1 K150A DS01 01
DDC01.1K150ADS0101
DDC011-K150A-DS01-01
DDC011K150ADS0101
DDCO1.1-K15OA-DSO1-O1
DDC01 1 K150A DS01 01
ddc01.1-k150a-ds01-01
DDC1.1-K150A-DS01-01
DDC01.1K150ADS0101
DDC011-K150A-DS01-01
DDC011K150ADS0101
DDCO1.1-K15OA-DSO1-O1
DDC01 1 K150A DS01 01
ddc01.1-k150a-ds01-01
DDC1.1-K150A-DS01-01
Fax: 1-919-867-6204
Shipping & Payment Options
Warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the DDC01.1-K150A-DS01-01.
Exchange
Want to sell your DDC01.1-K150A-DS01-01?
