DDC Digital Intelligent Servo Drives | Indramat Drives
R911266489 (DDC01.1-K200A-DL02-01-FW)
Request a quote
Description
Rated 5 with 13 reviews
The Bosch Rexroth R911266489 (DDC01.1-K200A-DL02-01-FW) is a three-phase current drive, designed for direct mounting to a forward feed unit. The product is maintenance-free and operates by allowing the unrestricted flow of cool air in and out. Power connections are made through the X7 connector, while optional plug-in modules and the motor feedback cable are connected underneath. Special care should be taken in installation to maintain the IP 65 protection rating. The drive must be vertically oriented, and an LED status display shows error signals, with a fault reset button located above. The product is well-suited for sequential finishing systems, and a dynamic braking action halts connected synchronous motors. Parameterization is completed through a CTA display and programming unit, with input and securement of parameters done via the Motion Manager editor and communications program, post-power-on. A separate firmware purchase is required, and the product is shipped with a warranty from Wake Industrial.Specs
Positioning: Mounted directly to a forward feed unit
Cooling: Needs unrestricted airflow entry and exit
Maintenance: Maintenance-free operation
Power Connection: Through X7 connector
Optional Modules Connection: Through underside
Required Installation: Vertical orientation
Length with Blower: 657.5mm
Length without Blower: 517.5mm
Front Panel Features: H1 LED status display and an S1 fault reset key
Use: Operation in sequential finishing systems
Parameterizing: Via CTA display and programming unit
Motor Earth Connection: Must encompass the drive controller
Drive Startup: Parameters should be programmed before starting
Firmware: Bought separately
Shipping: Through a trustworthy network
Cooling: Needs unrestricted airflow entry and exit
Maintenance: Maintenance-free operation
Power Connection: Through X7 connector
Optional Modules Connection: Through underside
Required Installation: Vertical orientation
Length with Blower: 657.5mm
Length without Blower: 517.5mm
Front Panel Features: H1 LED status display and an S1 fault reset key
Use: Operation in sequential finishing systems
Parameterizing: Via CTA display and programming unit
Motor Earth Connection: Must encompass the drive controller
Drive Startup: Parameters should be programmed before starting
Firmware: Bought separately
Shipping: Through a trustworthy network
Shipping
Call For Quote | Warranty | Shipping | Repairs | Exchange |
|---|---|---|---|
| 1 Year Indramat USA Warranty included | Worldwide shipping via UPS and Fedex | We offer repair service for the R911266489 in 10 days. | Exchange credit for your defective unit available. |
