DDC Digital Intelligent Servo Drives | Indramat Drives
R911270105 (DDC01.1-K100A-DS47-00-FW)
Request a quote
Description
Rated 4.1 with 4 reviews
The Bosch Rexroth Indramat's DDC01.1-K100A-DS24-03-FW is a microprocessor-controlled, three-phase DDC drive unit featuring an integrated DC bus converter, mains contactor, and power section. The device is characterized by a brushless design, high-resolution rotor position determination capability, and internal bleeder resistor. This 50/60 Hz operating frequency drive is designed for efficient control of voltages and enables power disconnection through its mains contactor. The unit boasts an installed plug-in card system to fulfill specific application needs. Featuring a SERCOS interface and a DSM software module, the drive unit ensures the holding of parameters and firmware. With a pulsating frequency of 4kHz and 100A peak current, it incorporates a power requirement of 10-12kW depending on the load. The unit weighing approximately 35 kg operates at a relative humidity of up to 95% and performs optimally at an installation height of up to 1000 meters above sea level.Specs
Product Model: DDC01.1-K100A-DS24-03-FW
Design: Brushless
Protection Level: IP 65
Internal Bleeder Resistor: Included
Phase: 3-phase
Operating Mechanism: Microprocessor controlled
Interface: SERCOS
Software Module: DSM
Operating Frequency: 50/60 Hz
Peak Current: 100 Amps
Pulse Frequency: 4 kHz
Continuous Bleeder Power: 0.25 kW
Approximate Weight: 35 kg
Maximum Power Requirement (at maximum load): 10 – 12 kW
Allowable Relative Humidity: maximum 95%
Perm. Absolute Humidity: 25 g water per cubic meter of air
Maximum Installation Height (at 100 % nominal data): 1000 meters above sea level
Permissible Temperature of Surrounding Air: 5 – 45 degrees Celsius
Design: Brushless
Protection Level: IP 65
Internal Bleeder Resistor: Included
Phase: 3-phase
Operating Mechanism: Microprocessor controlled
Interface: SERCOS
Software Module: DSM
Operating Frequency: 50/60 Hz
Peak Current: 100 Amps
Pulse Frequency: 4 kHz
Continuous Bleeder Power: 0.25 kW
Approximate Weight: 35 kg
Maximum Power Requirement (at maximum load): 10 – 12 kW
Allowable Relative Humidity: maximum 95%
Perm. Absolute Humidity: 25 g water per cubic meter of air
Maximum Installation Height (at 100 % nominal data): 1000 meters above sea level
Permissible Temperature of Surrounding Air: 5 – 45 degrees Celsius
Shipping
Call For Quote | Warranty | Shipping | Repairs | Exchange |
|---|---|---|---|
| 1 Year Indramat USA Warranty included | Worldwide shipping via UPS and Fedex | We offer repair service for the R911270105 in 10 days. | Exchange credit for your defective unit available. |
