DDC Digital Intelligent Servo Drives | Indramat Drives
R911270739 (DDC01.2-N050C-DA01-01-FW)
Request a quote
Description
Rated 4.4 with 5 reviews
The R911270739 (DDC01.2-N050C-DA01-01-FW) is a drive controller manufactured by Rexroth Indramat that supports digital servo feedback, and it is commonly used for motor control functions. The device's analog command module enables communication with traditional controllers via an analog interface, as well as outputs incremental encoder signals. Installed in the designated U1 slot, its function code is 01. This controller requires a separate firmware order to ensure a perfect fit for your application. With an input that can connect to a three-phase AC of 220 - 230 Volts, it can accommodate an input frequency range of 50 to 60 Hertz. The controller outputs a continuous current of 25 Amps, hosting a power loss of 500 Watts at full load without including bleeder power loss. It weighs in at 21 kilograms and has 65mm height, 295mm depth, and 165mm width. Plus, you'll see a configuration rating plate, fault reset key, status display, and plugin module slots on the front panel. The product ships globally with a one-year warranty from Wake Industrial.Specs
Amperage Rating: 50 Amps
Noise Emission: Standard
Motor Feedback: Integrated Digital Servo Interface
Command Module: Analog
Command Communication Card: Controls Input and Signal Outputs
Encoder Signals: Incremental
Command Module Slot: U1
Function Code: 01
Version of Function Code: 01
Power Input: Three-phase 220 Volts AC or 230 Volts AC
Input Frequency Range: 50 to 60 Hertz
Average Current Output: 25 Amps
Maximum Device Load Power Loss: 500 Watts
Continuous Bleeder Power: 0.25 kilowatts
Peak Bleeder Power: 10 kilowatts
Weight: 21 kilograms
Height: 65 millimeters
Depth: 295 millimeters
Width: 165 millimeters
Noise Emission: Standard
Motor Feedback: Integrated Digital Servo Interface
Command Module: Analog
Command Communication Card: Controls Input and Signal Outputs
Encoder Signals: Incremental
Command Module Slot: U1
Function Code: 01
Version of Function Code: 01
Power Input: Three-phase 220 Volts AC or 230 Volts AC
Input Frequency Range: 50 to 60 Hertz
Average Current Output: 25 Amps
Maximum Device Load Power Loss: 500 Watts
Continuous Bleeder Power: 0.25 kilowatts
Peak Bleeder Power: 10 kilowatts
Weight: 21 kilograms
Height: 65 millimeters
Depth: 295 millimeters
Width: 165 millimeters
Shipping
In Stock, Ships 2-3 Days | Warranty | Shipping | Repairs | Exchange |
|---|---|---|---|
| 1 Year Indramat USA Warranty included | Worldwide shipping via UPS and Fedex | We offer repair service for the R911270739 in 10 days. | Exchange credit for your defective unit available. |
