DDC Digital Intelligent Servo Drives | Indramat Drives
R911276400 (DDC01.2-N050C-DS50-00-FW)
Request a quote
Description
Rated 4.4 with 8 reviews
The Bosch Rexroth R911276400 (DDC01.2-N050C-DS50-00-FW) digital servo drive offers controlled deceleration and a mains contactor that remains off until the ZKS input is sealed. Braking is achieved by opening this input. A connection to the machine control unit is made via the X8 interface, through a cable no longer than 20m. The fault reset key resolves signalized errors, while the X3 connector links the device to analog inputs and outputs. Storage and transportation should occur between -30°C and 85°C, with humidity levels less than 95%. An RS 232 interface at the X2 connector enables a connection with a PC or VT-100 terminal. The device should always be disconnected during high voltage tests and needs regular cleaning when used in dirty environments. The unit's IP 65 protection category can be compromised if cables aren't properly connected, and the device should always be vertically installed. This drive comes with a one-year warranty and is deliverable through FedEx or DHL.Specs
Deceleration Control: No
Main Contactor Operability: ZKS Input Closure Required
Connection to Control Unit: X8 Interface (Max 20m Cable)
Fault Reset: Present
Analog Connection: X3 Connector
Storage Temperature: -30°C to 85°C
Relative Humidity: Maximum 95%
PC/VT-100 Terminal Connection: RS 232 interface at X2 connector
High Voltage checks: Connection-free operation necessary
Maintenance: Maintenance-free
Cleaning Requirement: Regular, for Blower and Heatsink
Power and Torque Ratings: Diminished at Altitudes
DC Bus: May short in case of drive fault
Length: 635mm
Installation Orientation: Vertical
Protection Category: IP 65
Cable Bend Radius: Should not be affected
Shipping: Available via FedEx/DHL
Main Contactor Operability: ZKS Input Closure Required
Connection to Control Unit: X8 Interface (Max 20m Cable)
Fault Reset: Present
Analog Connection: X3 Connector
Storage Temperature: -30°C to 85°C
Relative Humidity: Maximum 95%
PC/VT-100 Terminal Connection: RS 232 interface at X2 connector
High Voltage checks: Connection-free operation necessary
Maintenance: Maintenance-free
Cleaning Requirement: Regular, for Blower and Heatsink
Power and Torque Ratings: Diminished at Altitudes
DC Bus: May short in case of drive fault
Length: 635mm
Installation Orientation: Vertical
Protection Category: IP 65
Cable Bend Radius: Should not be affected
Shipping: Available via FedEx/DHL
Shipping
In Stock, Ships in 3-5 Days | Warranty | Shipping | Repairs | Exchange |
|---|---|---|---|
| 1 Year Indramat USA Warranty included | Worldwide shipping via UPS and Fedex | We offer repair service for the R911276400 in 10 days. | Exchange credit for your defective unit available. |
