R911281842 (DDC01.2-N200A-DS64-01-FW)

Description

The R911281842 (DDC01.2-N200A-DS64-01-FW) is a Rexroth Indramat series 1 DDC digital drive controller, crafted for utilization with servo motors. It functions at a 50-60 Hertz frequency with a 4 kHz PWM frequency, integrating a SERCOS interface for command and communication. With an input voltage of 3 x 220 Volts, it implements a digital servo motor feedback. The controller accommodates a 5-95% relative humidity range and upholds an IP 65 protection level according to EN 60 529, weighing in at an approximate 22 kg. Its built-in bleeder resistor boasts a peak power of 40 kW and continuous power of 0.25 kW, generating a maximum of 20 kW when regenerating. Noise emission at the connected servo motor's shaft ranges from 100-200 Amperes. Featuring an emergency stop-triggered dynamic braking system, this controller operates optimally in temperatures ranging from 5-45 degrees C and at elevations not exceeding 1000 meters above sea level. Shipment is globally accessible, with a complementary one-year warranty from Indramat USA.

---