DKR Drive Controllers | Indramat Drives
R911265631 (DKR03.1-W200Z-BE12-01-FW)
Request a quote
Description
Rated 4.8 with 8 reviews
The R911265631 (DKR03.1-W200Z-BE12-01-FW) Controller, made by Bosch Rexroth, is used for the precise management and regulation of an attached motor and should be mounted only as directed by the manufacturer. It consists of a basic unit, auxiliary plug-in module(s), command interface card(s) and proprietary software module. It leverages a SERCOS interface for command communication and requires the drives to be still before any hazard zone is accessed. Touching the unit can result in burns due to its capacity to become very hot during operation. Inappropriate handling may result in personnel injury. The brake resistor has a peak power of 40kW and continuous power of 1kW. The unit should be stored and transported within the temperature range of -30°C and 80°C. Overloading could lead to damage. This device offers limited shock resistance and has a minimal airflow requirement of 300m3/h. For optimal performance, maintain a minimum distance of 100mm between control and power or signal cables.Pricing & Availability
- Factory New Pricing is available!
Specs
Interface: SERCOS
Standstill Mode Requirement: Yes
Risk Factor: Burns due to hot housing, resistor and heatsink
Peak Power: 40kW
Continuous Power: 1kW
Storage and Transport Temperature: -30°C to 80°C
Overload: Can cause damage
Shock Resistance: Limited
Minimum Airflow: 300m3/h
Energy Dissipation: Load dependent
Distance Between Control and Power/Signal Cables: Minimum 100mm
Motor Connection Cable Maximum Length: 75m
Shielded Cable Requirement: Yes, in residential or light industrial areas
Fiber Optic Cable Requirement: Yes
Transport Requirement: Shock-damped supports if excessive shock expected
Storage Requirement: Dust-free, shock-free, dry place
Standstill Mode Requirement: Yes
Risk Factor: Burns due to hot housing, resistor and heatsink
Peak Power: 40kW
Continuous Power: 1kW
Storage and Transport Temperature: -30°C to 80°C
Overload: Can cause damage
Shock Resistance: Limited
Minimum Airflow: 300m3/h
Energy Dissipation: Load dependent
Distance Between Control and Power/Signal Cables: Minimum 100mm
Motor Connection Cable Maximum Length: 75m
Shielded Cable Requirement: Yes, in residential or light industrial areas
Fiber Optic Cable Requirement: Yes
Transport Requirement: Shock-damped supports if excessive shock expected
Storage Requirement: Dust-free, shock-free, dry place
Shipping
In Stock, Ships Fast | Warranty | Shipping | Repairs | Exchange |
|---|---|---|---|
| 1 Year Indramat USA Warranty included | Worldwide shipping via UPS and Fedex | We offer repair service for the R911265631 in 10 days. | Exchange credit for your defective unit available. |
