The R911289882 (DKR03.1-W100N-BA03-01-FW) is a drive controller from Rexroth Indramat's DKR series, weighing approximately 49kg. It has a rated current of 100 Amps, a system frequency of 50-60 Hz, and uses a built-in blower for cooling. The controller uses resolver feedback and an analog interface for command communications. Its software module, going separately, should be installed on plug-in or DSM firmware modules. Heat is dissipated at 900 W or with cooling at 600 W. It features a peak regenerated shaft power of circa 26 kW every 10 seconds, with a peak current rating of 71 Amps and control voltage at 230V ±10% AC. Maximum power voltage frequency is 800 Hz for a 4 kHz controller, or 1600 Hz for an 8 kHz one. Optimal operating conditions are +5 to +45 degrees and 0-1000 m elevation. Regular maintenance is advised for the cooling system. Comes with a one-year warranty from Indramat USA and can be shipped globally.
Product Group: DKR Weight: 49 Kg Rated Current: 100 Amps System Frequency: 50-60 Hz Cooling Method: Built-in Blower Motor Feedback: Resolver Command Communication: Analog Interface Heat Dissipation (Total): 900 W Heat Dissipation (With Cooling): 600 W Peak Shaft Power (Per 10 Sec): 26 kW Peak Current Rating: 71 Amps Control Voltage Rating: 230V ±10% AC Power Voltage Frequency (4 kHz Drive Controller): 800 Hz Power Voltage Frequency (8 kHz Drive Controller): 1600 Hz Ambient Condition: +5 to +45 degrees Installation Elevation: 0-1000 m