Feedback Control: Standard Encoder Interface
System Composition: Power Supply Module, Three-Phase Inverter Module
DC Link Voltage: 670V Regulated, 715V Non-regulated
Power Requirement: 0.89 A from 24 V supply
Operating Interface: 16-bit Analog, VeCon Chip
Inverter Module: 3-Phase
Controller Cycle Time: 62.5 Microseconds
Shock Resistance: 15g DIN IEC 68-2-27
Vibration Resistance: 2 to 150 Hz Frequency Range
Climate Protection: 3K3 Category EN 60 721
Installation Requirements: IP54 Protection Standard Cabinets
Weight: 6 KG
Width: 50 mm
Switching Frequency: 4 kHz and 8 kHz
RF Current: 0.8 Arms and 1.4 Arms