The Bosch Rexroth Indramat EFC3610-0K40-1P2-MDA-NN-NNNNN-NNNN from the EFC Frequency Converters series by Bosch Rexroth Indramat delivers precise AC drive performance with a continuous power of 0.4 kW and a connection voltage of 240V. It supports single-phase input and integrates a Modbus communication module for seamless system networking. The drive meets industrial standards with an IP20 degree of protection and complies with EMC filter class C3. This compact converter is engineered for reliable operation in demanding automation environments.
Prior to commissioning, the EFC3610-0K40-1P2-MDA-NN-NNNNN-NNNN must be installed by qualified personnel following all safety notes. The allowable ambient temperature range extends from –25 °C to +55 °C, and it can tolerate up to 95 % humidity (non-condensing). Observe a minimum discharge interval of 10 minutes after shutdown before servicing any electrical connections. Ensure all protective covers and guards are fitted, and use only manufacturer-approved spare parts to maintain warranty compliance and operational safety.
For optimal cooling, mount the converter vertically with at least 150 mm clearance above and below, and install a baffle plate to prevent hot-air recirculation. Employ twisted-pair or shielded cables for all control-circuit wiring to minimize electromagnetic interference. The removable operating panel features a display and keys plus three LED indicators: RUN, FWD, and REV, which provide clear status feedback on drive operation.
Communication Module
Modbus
Connection Voltage
240V
Continuous Power
0.4kW