The Bosch Rexroth Indramat FECP01.1-220K-3P660-A-BN-NNNN-01V01 from the FEC Frequency Converters series delivers robust performance with a rated power of 22 kW and a mains connecting voltage of 660 V across its three-phase input. It operates reliably over an input frequency range of 50/60 Hz with a tolerance of ±5 Hz and maintains rated data from –10°C to 40°C ambient temperature. The converter can handle an overload of 120% of rated current for 1 minute and features two work modes when the frequency command falls below the set lower limit. Its advanced PI adjustment function processes sensor feedback for precise motor control.
Installation and system integration are simplified by requiring only adequate clearance distance above and below the unit inside the control cabinet and by built-in discharging devices with voltage below 50 V within specified discharge times. Energy storage is managed by DC bus capacitors, while firmware is tracked with a version code of 01 and release status code of 01. Network configuration is streamlined via a slave address setting of 01H, and on-board diagnostics record and display the causes of the last four faults for rapid troubleshooting. The device ensures output voltage never exceeds input voltage to protect connected motors.
Routine maintenance mandates inspection for loose parts or deformation before operation, and all live-part work must follow a power-off interval of at least 30 minutes with the supply switch secured against unauthorized re-energization. The converter’s output voltage limit safeguards downstream equipment, and its one-year Wake Industrial warranty guarantees support from shipment to commissioning. This frequency converter blends high power density with comprehensive safety and diagnostic features for demanding industrial environments.
Mains Connecting Voltage
660 V
Other Design
None
Power (kW)
22 kW