The Bosch Rexroth Indramat FECP01.2-11K0-3P400-A-BN-NNNN-01V01 from the FEC Frequency Converters series is engineered for robust industrial pump control, delivering 15 kW Power (kW) from a three-phase 400 V Mains Connecting Voltage supply. This frequency converter features an integrated brake chopper and supports continuous output of 24 A for sustained operation. With a rated output of 11 kW, the unit is designed for high overcurrent carrying capacity and a broad performance spectrum. The converter's Other Design specification is listed as None, reflecting its streamlined, modular construction.
Installation and environmental resilience are key highlights of this model. The IP20 enclosure requires vertical mounting with a minimum clearance of 50 mm on each side and 150 mm above and below to ensure adequate airflow. It operates reliably in ambient temperatures from -10 C to +40 C, in relative humidity up to 95 %, and at altitudes up to 1 000 m without derating. The sturdy housing and absence of additional design overlays simplify integration into diverse control panels.
Control versatility is delivered through V/f control technology with a freely definable V/f curve and automatic energy-saving adaptation. The converter's PWM frequency range of 1-8 kHz and a speed control ratio of 1:100 offer precise speed regulation, while a maximum startup torque of 150 % at 5 Hz ensures dynamic motor acceleration. Firmware version 01 and an onboard PID controller enable advanced tuning, with status messages available via digital outputs for seamless integration into modern automation systems.
Mains Connecting Voltage
400 V
Other Design
None
Power (kW)
15 kW