HCS01.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW
HCS IndraDrive Controllers
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
CANopen
Safety Interface
STO (Safe Torque Off)
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
3 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
How is fieldbus communication handled in the HCS01.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW controller?
It supports EtherCAT and CANopen fieldbus protocols, enabling synchronous motion control and real-time data exchange with master PLCs.
Does the Bosch Rexroth Indramat HCS01.1E controller allow firmware parameterization via USB?
Yes, its USB service interface enables firmware flashing and parameter cloning through IndraWorks DS configuration software.
How does the HCS01.1E controller ensure smooth start-up in multi-axis networks?
It uses bus-synchronized initialization with deterministic start-up sequencing, reducing inrush surges and enabling phase-balanced ramp-up.
How does the Bosch Rexroth Indramat HCS01.1E controller perform during high-overload cycles?
Its IGBT module and temperature-compensated current control sustain 200 % rated overload for 3 seconds, ensuring torque peaks under transient load.
How does firmware protect against data corruption in the HCS01.1E controller?
The system utilizes dual-bank flash ROM architecture with checksum verification and rollback for safe firmware recovery.
Common Misspellings
HCS011EW0003A02BETECCNL3NNFW
HCS01 1E W0003 A 02 B ET EC CN L3 NN FW
hcs03.1e-w0210-a-05-nnnv-aa
HCS1.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW
Internal Product Review
The HCS01.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW controller by Bosch Rexroth Indramat from the HCS series delivers precise one-axis drive control. It consumes 3.3–54 A output current and up to 14 kW power for stable operation. It is used in servo axis drives and heavy machinery applications requiring dynamic control efficiency.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW.
Want to 
