HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW
HCS IndraDrive Controllers
The HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW is a HCS Drive Controller by Bosch Rexroth Indramat, part of the HCS IndraDrive Controllers series. It supports MultiEthernet communication, operates on 3 x AC 110...230 V ±10% with a peak current of 3 A, and uses an internal blower for air cooling. Rated IP20, it features Encoder IndraDyn Hiperface/EnDat 2.1/2.2 interfaces and pairs with Control Section Design 'BASIC'.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Safety Interface
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
3 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What configuration steps are required to parameterize the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller for closed-loop control?
The parameters for current, torque, and velocity loops must be set through IndraWorks software, ensuring encoder alignment and feedback offset calibration.
Does the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller support regenerative energy handling?
Yes, its feeded/infeeding supply allows controlled energy return to the DC bus, reducing external resistor dissipation and improving energy efficiency.
What startup calibration routines are used in the HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller?
It runs automatic offset tuning, encoder referencing, and motor identification routines to establish baseline torque and velocity constants.
How is electromagnetic compatibility achieved in Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller systems?
The integrated EMC filters and shielded connection terminals minimize conducted emissions and ensure compliance with industrial electromagnetic immunity standards.
Does the HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller support multi-protocol communication?
Yes, depending on firmware variant, it can integrate with EtherCAT, SERCOS III, or PROFIBUS DP for flexible automation connectivity.
Common Misspellings
HCS011EW0003A02BETECECNNAAFW
HCS01 1E W0003 A 02 B ET EC EC NN AA FW
hcs03.1e-w0280-a-05-nnnv
HCS1.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW
Internal Product Review
The Bosch Rexroth Indramat HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller comes from the renowned HCS drive controller series. It consumes 3 A peak current with IndraDyn Hiperface/EnDat interface. It is widely applied in conveyors, crushing, mining applications and in compact industrial systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW.
Want to 
