HCS01.1E-W0003-A-02-B-ET-EC-NN-L4-NN-FW
HCS IndraDrive Controllers
The HCS01.1E-W0003-A-02-B-ET-EC-NN-L4-NN-FW from Bosch Rexroth Indramat is a HCS Drive Controller in the HCS01 line series. Part of the HCS IndraDrive Controllers it offers a MultiEthernet interface and an IP20 rating. It supports STO and SBC safety functions and uses an internal air cooling blower.
The controller runs on 3 × AC 110–230 V ±10% and delivers a peak current of 3 A. Firmware must be ordered separately. Pairing uses Control Section Design BASIC.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Not equipped
Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
3 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What is the rated continuous current capability of the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-NN-L4-NN-FW controller for motor regulation?
The controller supports a continuous current allowing 8W dissipation, ensuring optimal current flow and precise torque control for both synchronous and asynchronous controller applications.
What cooling protocol applies to the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-NN-L4-NN-FW controller after motor operations?
A mandatory 15-minute cooling interval after power-off allows internal capacitors and semiconductors to stabilize before reactivation.
Does the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-NN-L4-NN-FW controller integrate an autotransformer in its supply circuit?
Yes, its main power input utilizes an autotransformer link, ensuring controlled voltage adaptation for global power configurations.
How can the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-NN-L4-NN-FW controller be paralleled with other drives?
The parallel connection requires independent fuses per controller line to isolate fault propagation between interconnected systems.
How does the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-NN-L4-NN-FW controller support third-party motor systems?
It can efficiently control synchronous or asynchronous third-party controllers using compatible feedback protocols and optimized drive algorithms.
Common Misspellings
HCS011EW0003A02BETECNNL4NNFW
HCS01 1E W0003 A 02 B ET EC NN L4 NN FW
hcs04.2e-w0290-n-04-nnbn
HCS1.1E-W0003-A-02-B-ET-EC-NN-L4-NN-FW
Internal Product Review
The HCS01.1E-W0003-A-02-B-ET-EC-NN-L4-NN-FW controller from Bosch Rexroth Indramat belongs to the reliable HCS series. It contains vertical mounting and 8W power dissipation at continuous current. This controller is ideal for driving asynchronous or synchronous controllers in automation, robotics, and industrial motion control systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0003-A-02-B-ET-EC-NN-L4-NN-FW.
Want to 
