HCS01.1E-W0003-A-02-B-ET-EC-NN-NN-AA-FW

The Bosch Rexroth Indramat HCS01.1E-W0003-A-02-B-ET-EC-NN-NN-AA-FW converter, part of the HCS IndraDrive Controllers series, delivers compact and efficient drive control for demanding industrial installations. Manufactured by Bosch Rexroth Indramat, this module supports a Mains Voltage of 3 x AC 110...230 V ±10% and features a Device Peak Current of 3 A. Its Cooling Method is Air, internal (through integrated blower), ensuring thermal stability in confined control cabinets. The unit's IP20 IP Rating protects internal electronics from dust ingress while maintaining accessibility for service. Designed within the Line Series HCS01, the product includes an integrated blower and a Power Supply Unit capable of both Infeeding / Feeded configurations for flexible system integration.

Featuring advanced communication and safety architectures, the controller employs a Communication Interface: MultiEthernet with dual sets of two yellow LED and two green LED displays for real-time network diagnostics. Its primary feedback path uses Interface 1 Type: Encoder IndraDyn Hiperface/EnDat 2.1/2.2, while Interface 2 Type is Not equipped, optimized for streamlined configurations. The Safety Interface is Not equipped in this design, but the device incorporates integrated safety technology within its firmware. The Control Section Design Type is specified as BASIC, with a corresponding Pairing Note indicating pairing with Control Section Design "BASIC" (B). As a modular component, the Firmware Order Note requires separate ordering of firmware sub-positions to match application demands.

Reliability is enhanced through a robust mounting scheme using two M6 × 20 screws and a dedicated strain relief for terminal connectors. Transport and storage tolerance spans 5% to 95% relative humidity without degradation of the integrated electrolytic capacitors. Motor encoder cabling is facilitated via a D-Sub female 15-pin connector, and a shielded plate arrangement ensures effective noise immunity. The controller's freely configurable digital inputs/outputs support customization in machine tool installations, such as wood machining or material processing. Retention of factory cable assemblies and avoidance of unauthorized hardware modification preserve warranty coverage and ensure compliance with the one-year Wake Industrial warranty for global dispatch.