HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW
HCS IndraDrive Controllers
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
3 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What is the operational voltage range of the Bosch Rexroth Indramat HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW controller?
It operates from 110 V to 230 V AC, accommodating both single and three-phase supplies with a ±10% voltage tolerance for stable control operation.
How does the HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW controller handle input frequency variation?
It tolerates ±2 Hz deviation within the 50–60 Hz frequency band, ensuring precise performance under slight mains fluctuations per UL 508C standard.
What short-circuit current rating applies to the Bosch Rexroth Indramat controller HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW?
The controller is rated at 42,000 A rms SCCR, enabling safe operation in high-fault-current industrial networks without component damage.
Does the Bosch Rexroth Indramat HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW controller support UL certification?
Yes, the controller is UL Listed under file E134201, validating it for industrial use with compliance to UL 508C performance parameters.
How is pollution degree 2 defined for this Bosch Rexroth Indramat HCS01.1E controller?
The pollution degree 2 indicates the controller is suitable for environments where only non-conductive contamination occurs, except under temporary condensation.
Common Misspellings
HCS011EW0003A02BETECNNSBNNFW
HCS01 1E W0003 A 02 B ET EC NN SB NN FW
hcs04.2e-w0390-n-06-nnnn
HCS1.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW
Internal Product Review
The Bosch Rexroth Indramat HCS series controller with model HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW is a compact drive control. It supports 50–60 Hz frequency and a SCCR of 42 kA rms current for short circuit. It is commonly used in automation lines to ensure dependable control with CSA and UL safety.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW.
Want to 
