HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-AA-FW
HCS IndraDrive Controllers
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
PROFIBUS
Safety Interface
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
3 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What thermal management system is integrated within the Bosch Rexroth Indramat controller HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-AA-FW?
The controller employs convection and conductive heat dissipation, maintaining nominal operation at 40 °C ambient with derating logic triggered beyond thermal limits.
How does Bosch Rexroth ensure compliance with UL 508C for HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-AA-FW controllers?
Its each unit is UL listed under file E134201, verified against surge, creepage, and leakage parameters for industrial control panels under UL 508C certification.
Where should the controller HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-AA-FW be mounted to ensure optimum environmental performance?
It must be installed in pollution degree 2 environments, allowing safe operation under up to 95% relative humidity and limited airborne conductive dust.
What short-circuit current rating (SCCR) defines the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-AA-FW safety capability?
It withstands 42,000 A rms fault current, enabling coordination with upstream protective devices and ensuring sustained insulation integrity under fault conditions.
How does the HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-AA-FW controller stabilize DC-link voltage under low-frequency deviation?
The unit’s voltage tolerance ±10% and frequency range 50–60 Hz ±2 Hz are buffered by active rectifier circuits maintaining constant Udc levels.
Common Misspellings
HCS011EW0003A02BETECPBNNAAFW
HCS01 1E W0003 A 02 B ET EC PB NN AA FW
hcs04.2e-w0520-n-04-dnbn
HCS1.1E-W0003-A-02-B-ET-EC-PB-NN-AA-FW
Internal Product Review
The Bosch Rexroth Indramat HCS series controller part code HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-AA-FW, is a reliable industrial drive solution. It offers a rated input voltage of 1 or 3 phase AC 110–230 V ±10% and an SCCR current of 42 kA. It is useful for precision automation and robotics where efficiency, durability and environmental tolerance are critical.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-AA-FW.
Want to 
