HCS01.1E-W0005-A-03-A-CC-EC-EC-NN-NN-FW
HCS IndraDrive Controllers
Technical Specifications
Communication Interface
SERCOS III master (cross communication)
Pairing Note
Paired with Control Section Design 'ADVANCED' (A)
Control Section Design Type
ADVANCED
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Safety Interface
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
5 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What is the allowable ambient temperature range for continuous operation of this Bosch Rexroth Indramat controller motor unit?
The operational stability is maintained between 0 °C and 40 °C, ensuring thermal consistency during high-cycle automated control tasks.
How is short-circuit protection achieved in the Bosch Rexroth Indramat HCS01.1E-W0005-A-03-A-CC-EC-EC-NN-NN-FW motor controller?
It integrates electronic fusing and line contactor isolation to sustain 42 kA rms short-circuit endurance under rated network impedance.
How does the Bosch Rexroth Indramat HCS01.1E-W0005-A-03-A-CC-EC-EC-NN-NN-FW controller handle surge currents on the motor interface?
It uses integrated suppression circuits and line filters that maintain surge resilience under transient conditions within ±10% voltage fluctuation.
Does the Bosch Rexroth Indramat controller motor circuit require external line chokes for harmonics management?
Yes, external AC line reactors are recommended to limit harmonic distortion in networks with high-frequency inverter switching.
Where does the Bosch Rexroth Indramat HCS01.1E controller interface with motion feedback systems?
It connects via encoder feedback channels supporting resolver or EnDat encoders for precise torque and velocity regulation.
Common Misspellings
HCS011EW0005A03ACCECECNNNNFW
HCS01 1E W0005 A 03 A CC EC EC NN NN FW
hcs01.1e-w0003-a-02-a-cc-ec-cn-nn-nn-fw
HCS1.1E-W0005-A-03-A-CC-EC-EC-NN-NN-FW
Internal Product Review
The Bosch Rexroth Indramat HCS series controller model HCS01.1E-W0005-A-03-A-CC-EC-EC-NN-NN-FW delivers reliable control. It supports 1/3-phase AC 110–230 V input ±10% voltage tolerance and has 42 kA SCCR current rating. It is used widely in batching systems and automated construction or printing machinery.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0005-A-03-A-CC-EC-EC-NN-NN-FW.
Want to 
