HCS01.1E-W0005-A-03-B-ET-EC-EC-NN-NN-FW
HCS IndraDrive Controllers
The HCS01.1E-W0005-A-03-B-ET-EC-EC-NN-NN-FW, Bosch Rexroth Indramat, HCS IndraDrive Controllers package delivers high-performance motion control in a compact footprint. As part of the HCS Compact Converter Series, it supports seamless integration with IndraDyn encoder systems and ensures precise regulation of motor speed and torque. Engineered for modular automation environments, the controller balances advanced functionality with space-saving design. Its robust construction underpins consistent performance even in demanding industrial settings.
Featuring a Mains Voltage: 3 x AC 200…500 V ±10% input range, the unit supplies a Device Peak Current: 5 A peak for rapid acceleration and dynamic load changes. Internal airflow is managed by an integrated blower, providing Cooling Method: Air, internal (through integrated blower) and Cooling Mode: Internal Air without external fans. Connectivity is delivered over Communication Interface: MultiEthernet, while dual encoder ports support Interface 1 Type: Encoder IndraDyn Hiperface/EnDat 2.1/2.2 and Interface 2 Type: Encoder IndraDyn Hiperface/EnDat 2.1/2.2 devices. The assembly meets IP Rating: IP20 standards and employs a Control Section Design Type: BASIC architecture; note that Firmware Order Note: Firmware must be ordered as separate sub position and the controller is Pairing Note: Paired with Control Section Design 'BASIC' (B).
Designed as a Product Type: HCS Drive Controller within the Line Series: HCS01, the HCS01.1E-W0005-A-03-B-ET-EC-EC-NN-NN-FW simplifies system expansion and maintenance. The Power Supply Unit: Infeeding / Feeded configuration ensures fault-tolerant operation and rapid recovery after power events. With no Safety Interface: Not equipped required for common installations, users benefit from straightforward commissioning and high system uptime.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Safety Interface
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
5 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Cooling Mode
Internal Air
Frequently Asked Questions
Why support both Hiperface and EnDat 2.1/2.2 on encoder ports?
Having dual support allows compatibility with a wide range of IndraDyn encoders without needing separate converters. The HCS01.1E-W0005 accommodates legacy and modern setups.
How does the 5 A peak capability assist in dynamic loads?
The peak current enables short bursts of acceleration or load changes without voltage drop. HCS01.1E-W0005 can thus manage jerky trajectories or load shifts without performance loss.
What safeguards prevent encoder interface conflicts?
The controller performs checks on encoder protocol compatibility and error detection (CRC, parity). On HCS01.1E-W0005, if an unsupported or mismatched encoder is connected, the system flags an initialization fault.
What are typical application areas for HCS01.1E-W0005-A-03-B-ET-EC-EC-NN-NN-FW controller in industry?
The controller is used in packaging, pick-and-place, labeling, and compact robotics where space is limited. Its precise torque control and compact footprint make it ideal for modular automation cells (application insight).
Why does the HCS01.1E-W0005-A-03-B-ET-EC-EC-NN-NN-FW controller use internal blower cooling rather than external fans?
The internal blower of HCS01.1E-W0005-A-03-B-ET-EC-EC-NN-NN-FW controller ensures controlled airflow over internal heat sinks, reducing external dust ingress. In the HCS01.1E-W0005 variant, it maintains thermal stability in IP20 enclosures under heavy load.
Common Misspellings
HCS011EW0005A03BETECECNNNNFW
HCS01 1E W0005 A 03 B ET EC EC NN NN FW
hcs01.1e-w0003-a-02-b-et-ec-ec-l4-nn-fw
HCS1.1E-W0005-A-03-B-ET-EC-EC-NN-NN-FW
Internal Product Review
Bosch Rexroth is the manufacturer of the HCS01.1E-W0005-A-03-B-ET-EC-NN-NN-NN-FW drive controller that delivers 5 A peak current and supports MultiEthernet communication. Its internal air cooling and IP20 enclosure ensure durability in industrial environments. It is ideal for applications that requires a compact and reliable motion control solutions.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0005-A-03-B-ET-EC-EC-NN-NN-FW.
Want to 
