HCS01.1E-W0005-A-03-B-ET-EC-EP-SB-NN-FW
HCS IndraDrive Controllers
The HCS01.1E-W0005-A-03-B-ET-EC-EP-SB-NN-FW is a HCS Drive Controller from Bosch Rexroth Indramat, part of the HCS IndraDrive Controllers series. It features MultiEthernet communication and pairs with Control Section Design 'BASIC' (B). Rated for 3 x AC 200...500 V +-10% and a device peak current of 5 A, it uses air internal cooling via an integrated blower, meets IP20 protection, supports Encoder IndraDyn Hiperface/EnDat 2.1/2.2, and requires firmware to be ordered separately.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
5 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What typical applications use the HCS01.1E-W0005-A-03-B drive controller?
The HCS01.1E-W0005-A-03-B drive controller is well suited for compact machine axes, robotics, pick-and-place or assembly lines. Its low-power, multi-Ethernet capabilities suit integrated motion control tasks
What mounting clearances are needed for HCS01.1E-W0005-A-03-B drive controller?
The HCS01.1E-W0005-A-03-B drive controller maintain lateral spacing for airflow and heat dissipation per the HCS01 datasheet. Minimum clearances prevent interference and thermal buildup.
How does infeeding / feeded power supply mode impact system design?
It allows the drive to either source (feed) or draw (infeed) regenerative energy back to the DC bus. This supports energy recycling in multi-axis systems and reduces heat in resistors.
In what situations would you choose this 5 A peak version over higher-current variants?
Use it for low-power axes or compact machines where peak currents seldom exceed 5 A. It reduces cost, size, and cooling demands while meeting control needs.
How does the BASIC control section pairing affect feature set?
The BASIC design gives essential servo control functions—no advanced cross-communication or cascaded coordination. It’s ideal when minimal overhead and simplicity are needed.
Common Misspellings
HCS011EW0005A03BETECEPSBNNFW
HCS01 1E W0005 A 03 B ET EC EP SB NN FW
hcs01.1e-w0003-a-02-b-et-ec-nn-l3-nn-aw
HCS1.1E-W0005-A-03-B-ET-EC-EP-SB-NN-FW
Internal Product Review
The HCS01.1E-W0005-A-03-B-ET-EC-EP-SB-NN-FW drive controller offers MultiEthernet communication, 5 A peak current, and supports IndraDyn Hiperface/EnDat 2.1/2.2 encoders. Its internal air cooling ensures efficient operation, IP20 protection guarantees basic dust safety. The controller is ideal for the packaging, Cnc and conyevour industries.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0005-A-03-B-ET-EC-EP-SB-NN-FW.
Want to 
