HCS01.1E-W0005-A-03-B-ET-EC-NN-L3-NN-AW

The HCS01.1E-W0005-A-03-B-ET-EC-NN-L3-NN-AW drive controller from Bosch Rexroth Indramat forms a key element of the HCS IndraDrive Controllers series. This Product Type is part of the Line Series HCS01 and supports a three-phase input voltage of 3 x AC 200...500 V ±10%. It features an IP20 protection rating and delivers a Device Peak Current of 5 A with a maximum inrush current of 3.3 A at a Control Voltage Input of 24 V DC. The controller relies on an Air, internal (through integrated blower) Cooling Method and draws only 27 W of power under standard conditions. The Power Supply Unit configuration can function as either infeeding or feeded, offering flexible integration options. The compact converter design follows Design Version 1 and pairs with Control Section Design Type BASIC (Paired with Control Section Design 'BASIC' (B)).

Performance is optimized through a rich set of interfaces and technical features. Communication is handled via MultiEthernet with a Communication Interface that ensures low-latency network control. Position feedback is supported through Encoder IndraDyn Hiperface/EnDat 2.1/2.2 on Interface 1 Type, while Interface 2 Type remains not equipped unless specified. Functional safety is maintained via the integrated STO (Safe Torque Off) Safety Interface. Transient response is governed by a current pulse width of 2 ms and an input capacitance of 0.04 millifarads. The controller supports mains frequencies of 50 to 60 Hz with a maximum rate of change of 2 Hz/s and requires 14 AWG wiring for AC input. Additional parameters include a single-line display, four-button keypad for diagnostics, and a slot for SD card–based firmware updates.

Reliability in industrial environments is assured through internal blower cooling and back-side mounting directly to the cabinet surface. The HCS01.1E series operates reliably in ambient temperatures from 0 to 40°C and dissipates heated air within the control cabinet to maintain stable thermal conditions. Installation by trained personnel minimizes errors and leverages the controller’s clear front-panel indicators for status, error codes, and pending warnings. With its compact footprint and robust IP20 enclosure, the unit integrates seamlessly into automated systems for packaging, material handling, and precision motion control. The modular design and support for safety functions make it ideal for applications demanding both performance and compliance with modern safety standards.