The HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW, Bosch Rexroth Indramat, HCS IndraDrive Controllers unit delivers a high-performance, compact solution designed for precision motion control applications. This HCS Drive Controller integrates seamlessly into automation environments, offering robust regulation of synchronous and asynchronous motors. Operating as part of the proven HCS Compact Converter Series, it combines industry-leading control algorithms with a modular hardware architecture. Engineers will appreciate the streamlined commissioning enabled by its thoughtfully organized connections and clear labeling.
The controller accommodates a wide range of supply conditions with a Mains Voltage rating of 3 x AC 200...500 V ±10% and supplies a Device Peak Current of 5 A for rapid torque response. Communication is handled via an integrated Communication Interface supporting MultiEthernet, while the on-board Interface 1 Type accepts Encoders such as IndraDyn Hiperface and EnDat 2.1/2.2. The unit adopts an IP Rating of IP20 and employs Cooling Method of Air, internal (through integrated blower) to maintain optimal thermal stability even under sustained loads. Its Control Section Design Type is classified as BASIC, with a Pairing Note indicating pairing with Control Section Design “BASIC” (B) for simplified configuration. The Line Series designation is HCS01, and the Power Supply Unit operates in both Infeeding / Feeded modes. Note that Firmware Order Note specifies firmware must be ordered as a separate sub position to match application requirements.
Thanks to its compact footprint and standardized interfaces, this HCS Drive Controller delivers reliable, maintenance-friendly operation across a variety of production settings. The integrated blower-based cooling and IP20 protection ensure long service intervals, while modular design permits rapid replacement or upgrade of control sections without rewiring. Ideal for packaging machines, printing presses, and automated assembly lines, the HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW maximizes uptime and simplifies lifecycle management of motion control systems.
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Firmware Order Note
Firmware must be ordered as separate sub position
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
5 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller