The Bosch Rexroth Indramat HCS01.1E-W0006-A-02-B-ET-EC-PB-L3-NN-FW drive controller from the HCS IndraDrive Controllers series delivers precise motion control in a compact footprint. Designed as a Product Type HCS Drive Controller, it supports a nominal Mains Voltage 3 x AC 110...230 V ±10% and provides a Device Peak Current 6 A to drive synchronized axes with high repeatability. Integration is seamless thanks to a native Communication Interface MultiEthernet and dual-field-bus support via Interface 2 Type PROFIBUS. The unit pairs with a Control Section Design Type BASIC as noted in the Pairing Note Paired with Control Section Design 'BASIC' (B), ensuring consistent operation across modular system architectures.
Cooling and protection are engineered for industrial performance: an Air, internal (through integrated blower) cooling method maintains optimal operating temperatures even under sustained loads, while an IP20 rating guards against ingress of solid contaminants. Safety is built in with a Safety Interface STO (Safe Torque Off), eliminating torque generation immediately in fault conditions. Encoder feedback is accommodated through Interface 1 Type Encoder IndraDyn Hiperface/EnDat 2.1/2.2, enabling high-resolution position loops and error-free synchronization. The drive is part of the Line Series HCS01, featuring Design Version 1 and a clear Firmware Order Note Firmware must be ordered as separate sub position to streamline field upgrades and firmware traceability.
Installation and maintenance are simplified by the integrated blower design and standardized form factor. The Power Supply Unit Infeeding / Feeded configuration supports flexible wiring topologies and regenerative energy management. With no additional features in Other Design Features None, this controller focuses on core functionality and reliability in automated manufacturing environments.
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Firmware Order Note
Firmware must be ordered as separate sub position
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
PROFIBUS
Safety Interface
STO (Safe Torque Off)
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
6 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller