HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW
HCS IndraDrive Controllers
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
8 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
How do the dual encoder interfaces benefit the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?
Dual encoders on HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW provide redundant position channels or permit mixed-protocol feedback simultaneously. This redundancy increases fault detection capability and helps preserve precise trajectory control even if one sensor degrades.
Which communication system operates in the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?
MultiEthernet is implemented on HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW to allow concurrent Ethernet protocol support for PLCs and supervision. This dual-level communication enables fast local control and broad system visibility without complex gateways.
How does cooling contribute to the reliability of the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?
The HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW uses directed blower cooling to maintain low junction temperatures during continuous operation. Consistent thermal management reduces drift in control loops and lengthens component service life when maintained properly.
What control section pairs with the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?
The BASIC control section is the standard match for HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW, delivering an uncomplicated configuration baseline. This pairing reduces commissioning overhead and is ideal for repeatable machine designs.
How does firmware customization enhance the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?
Custom firmware for HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW enables optimized encoder handling and advanced diagnostics. Validated firmware images reduce integration surprises and allow teams to enable features that match their exact motion and safety architecture.
Common Misspellings
HCS011EW0008A03AETECECS4NNFW
HCS01 1E W0008 A 03 A ET EC EC S4 NN FW
hcs01.1e-w0006-a-02-b-et-ec-ec-s4-nn-fw
HCS1.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW
Internal Product Review
Bosch Rexroth Indramat's HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW stands out for its dual encoder inputs that enable redundant or parallel feedback schemes. This improves positional certainty and further smoothes coordinated multi-axis motion.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW.
Want to 
