HCS01.1E-W0008-A-03-A-ET-EC-EM-S4-NN-FW

HCS IndraDrive Controllers

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The HCS01.1E-W0008-A-03-A-ET-EC-EM-S4-NN-FW from Bosch Rexroth Indramat is part of the HCS IndraDrive Controllers series. It runs on 3xAC 200–500 V ±10% with an 8 A peak current, features IP20 protection and internal air cooling via an integrated blower. Communication is via MultiEthernet and it supports both IndraDyn Hiperface/EnDat 2.1/2.2 and encoder emulation interfaces. It pairs with the BASIC control section and firmware must be ordered separately.

Technical Specifications

Communication Interface
MultiEthernet

Pairing Note
Paired with Control Section Design 'BASIC' (B)

Cooling Method
Air, internal (through integrated blower)

IP Rating
IP20

Design Version
1

Firmware Order Note
Firmware must be ordered as separate sub position

Other Design Features
None

Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2

Interface 2 Type
Encoder emulation

Line Series
HCS01

Mains Voltage
3 x AC 200...500 V ±10%

Device Peak Current
8 A

Power Supply Unit
Infeeding / Feeded

Product Type
HCS Drive Controller

Frequently Asked Questions

How do the dual encoder interfaces operate on the HCS01.1E-W0008-A-03-A-ET-EC-EM-S4-NN-FW?

Dual interfaces permit two independent feedback channels, which may be used for redundant monitoring or to support different encoder protocols concurrently. This arrangement increases positional reliability and enables cross-checking of sensor data during critical operations.

What advantage does encoder emulation add to the HCS01.1E-W0008-A-03-A-ET-EC-EM-S4-NN-FW?

Emulation allows the drive to maintain control loop stability when an encoder fails, temporarily simulating expected feedback behaviour. This capability reduces immediate process interruptions and grants technicians controlled time for corrective maintenance.

How does MultiEthernet support complex architectures with the HCS01.1E-W0008-A-03-A-ET-EC-EM-S4-NN-FW?

MultiEthernet supports integration across modern network layers, enabling seamless connection to PLCs, motion controllers and industrial PCs without bespoke protocol translation. That reduces latency and simplifies topologies in high-performance systems.

How does the IP20 classification impact reliability of the HCS01.1E-W0008-A-03-A-ET-EC-EM-S4-NN-FW in production environments?

IP20 provides protection against accidental contact and large particles but not against moisture or fine dust, so the unit performs well in cabinetized, climate-controlled areas. Where airborne contamination is present, additional protective enclosures are advisable to preserve reliability.

How does firmware ordering practice influence lifecycle management for the HCS01.1E-W0008-A-03-A-ET-EC-EM-S4-NN-FW?

Ordering firmware as a separate item enables structured firmware lifecycle policies, allowing controlled validation and deployment per batch. This reduces risk during version changes and facilitates traceability for maintenance records.

Common Misspellings

Internal Product Review

The model HCS01.1E-W0008-A-03-A-ET-EC-EM-S4-NN-FW combines dual encoder interfaces with encoder emulation to optimize feedback redundancy. That configuration supports high-precision applications by enabling primary and secondary feedback channels with graceful degradation under sensor fault conditions.