HCS01.1E-W0008-A-03-A-ET-EC-NN-L3-NN-FW

HCS IndraDrive Controllers

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The HCS01.1E-W0008-A-03-A-ET-EC-NN-L3-NN-FW is an HCS Drive Controller with a device peak current of 8 A. Manufactured by Bosch Rexroth Indramat in the HCS IndraDrive Controllers series, it features a MultiEthernet interface. It uses internal air cooling with an integrated blower and has IP20 protection.

Technical Specifications

Communication Interface
MultiEthernet

Pairing Note
Paired with Control Section Design 'BASIC' (B)

Cooling Method
Air, internal (through integrated blower)

IP Rating
IP20

Design Version
1

Firmware Order Note
Firmware must be ordered as separate sub position

Other Design Features
None

Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2

Interface 2 Type
Not equipped

Safety Interface
STO (Safe Torque Off)

Line Series
HCS01

Mains Voltage
3 x AC 200...500 V ±10%

Device Peak Current
8 A

Power Supply Unit
Infeeding / Feeded

Product Type
HCS Drive Controller

Frequently Asked Questions

How does Safe Torque Off function on the HCS01.1E-W0008-A-03-A-ET-EC-NN-L3-NN-FW?

STO removes the drive’s ability to generate torque on a safety event, ensuring motors cannot produce motion until cleared. This function is critical for personnel safety during maintenance and simplifies adherence to machine safety standards.

What network flexibility does MultiEthernet provide for the HCS01.1E-W0008-A-03-A-ET-EC-NN-L3-NN-FW?

MultiEthernet supports multiple Ethernet-based industrial protocols, easing integration with different PLC brands and supervisory systems. That reduces gateway needs and shortens the time required to connect to existing plant networks.

How does internal blower cooling affect thermal performance for the HCS01.1E-W0008-A-03-A-ET-EC-NN-L3-NN-FW?

The blower establishes directed airflow across the power stage, stabilizing component temperatures during continuous operation and improving reliability under load. Proper airflow management also simplifies thermal modeling for enclosure design.

How does IP20 influence installation recommendations for the HCS01.1E-W0008-A-03-A-ET-EC-NN-L3-NN-FW?

IP20 suggests installation inside ventilated control cabinets in clean indoor facilities, protecting electronics from accidental contact while allowing necessary heat exchange. For dusty or wet environments, additional enclosures are required.

What are the operational advantages of specifying the HCS01.1E-W0008-A-03-A-ET-EC-NN-L3-NN-FW for retrofit projects?

Its combination of STO safety, MultiEthernet connectivity and compact footprint makes it suitable for replacing legacy drives in machines that need modern networking and safety without extensive cabinet redesign. This minimizes retrofit time and cost while upgrading control capabilities.

Common Misspellings

Internal Product Review

The HCS01.1E-W0008-A-03-A-ET-EC-NN-L3-NN-FW is one of the most in demand controller choice. It is designed for safe shutdown behavior via Safe Torque Off while offering MultiEthernet for flexible networking. This combination suits installations prioritizing safety compliance and modern connectivity without adding unnecessary hardware complexity.