HCS01.1E-W0008-A-03-B-ET-EC-EC-L3-NN-FW
HCS IndraDrive Controllers
The HCS01.1E-W0008-A-03-B-ET-EC-EC-L3-NN-FW from Bosch Rexroth Indramat features a MultiEthernet communication interface and an internal air cooling method. Part of the HCS IndraDrive Controllers, this drive controller offers an IP20 rating and operates on a mains voltage of 3 × AC 200–500 V ±10%.
It supports Safe Torque Off functionality and delivers a peak current of 8 A with Basic control section design. The firmware must be ordered separately.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Safety Interface
STO (Safe Torque Off)
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
8 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What practical safety capability does HCS01.1E-W0008-A-03-B-ET-EC-EC-L3-NN-FW provide?
It provides Safe Torque Off which disables motor torque generation during safety events to prevent motion. This functionality simplifies machine-level safety design and is critical for safe maintenance and emergency stops.
How does internal air cooling maintain performance in the HCS01.1E-W0008-A-03-B-ET-EC-EC-L3-NN-FW?
The integrated blower provides targeted airflow that stabilizes component temperatures under continuous loads, preventing thermal throttling. Predictable thermal profiles enable better lifetime projections and maintenance scheduling.
Which encoder interfaces does HCS01.1E-W0008-A-03-B-ET-EC-EC-L3-NN-FW support?
Dual IndraDyn Hiperface and EnDat interfaces are supported, enabling high-resolution feedback for accurate closed-loop control and reduced position error. This supports fine-tuned motion profiles in precision applications.
What does pairing with BASIC control section imply for setup complexity on HCS01.1E-W0008-A-03-B-ET-EC-EC-L3-NN-FW?
BASIC pairing reduces optional advanced parameters, simplifying the initial setup while keeping essential tuning possible. This reduces commissioning time for standard servo tasks and supports repeatable configuration templates.
What enclosure guidance follows from IP20 for HCS01.1E-W0008-A-03-B-ET-EC-EC-L3-NN-FW?
Use climate-controlled cabinets with adequate ventilation and filtration to maintain clean airflow; avoid direct exposure to spray, dust, or moisture. Proper cabinet design preserves cooling efficiency and protects electronics.
Common Misspellings
HCS011EW0008A03BETECECL3NNFW
HCS01 1E W0008 A 03 B ET EC EC L3 NN FW
hcs01.1e-w0006-a-02-b-et-ec-nn-nn-nn-fw
HCS1.1E-W0008-A-03-B-ET-EC-EC-L3-NN-FW
Internal Product Review
Bosch Rexroth's HCS01.1E-W0008-A-03-B-ET-EC-EC-L3-NN-FW targets reliable basic motion control with embedded Safe Torque Off. It prioritizes essential safety compliance and deterministic MultiEthernet networking. This further offers integrators a pragmatic balance between operational safety and straightforward network integration for mid-tier machines.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0008-A-03-B-ET-EC-EC-L3-NN-FW.
Want to 
