HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-AA-FW
HCS IndraDrive Controllers
HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-AA-FW, Bosch Rexroth Indramat, HCS IndraDrive Controllers product is a high-performance drive controller optimized for precision motion applications. It integrates seamlessly into modular automation systems as part of the HCS Compact Converter Series, providing robust control in a compact form factor. The controller supports a wide Mains Voltage range of 3 x AC 200...500 V ±10% and delivers a Device Peak Current of 8 A for demanding startup and transient loads. Designed for industrial environments, it features an IP20 rating to protect internal electronics against solid contaminants.
Advanced communication and encoder interfaces ensure precise feedback and system synchronization. The drive supports MultiEthernet as its primary Communication Interface, while dual encoder channels accommodate Encoder IndraDyn Hiperface/EnDat 2.1/2.2 protocols on both Interface 1 and Interface 2. Cooling is managed via an internal blower in an Air, internal (through integrated blower) Cooling Method, eliminating the need for external fans. Its Control Section Design Type is specified as BASIC with a corresponding Pairing Note that it’s paired with Control Section Design ‘BASIC’ (B). The Power Supply Unit functions in both Infeeding/Feeded modes to streamline wiring and redundancy. The drive is issued as Design Version 1, and its Firmware Order Note indicates firmware must be ordered as a separate sub position.
Engineered for seamless integration, this HCS drive controller delivers plug-and-play compatibility with Rexroth IndraDyn motors, supporting scalable multi-axis systems. The robust design and standardized interfaces reduce commissioning time and simplify maintenance. Reliable operation is assured through proven industrial-grade components, making it ideal for packaging machinery, CNC tools, and robotics where uptime and precision are critical.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Safety Interface
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
8 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
How does HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-AA-FW handle encoder connectivity?
The unit provides two dedicated encoder channels compatible with high-resolution servo encoders, allowing direct motor feedback integration. This architecture supports precise loop tuning and provides diagnostic telemetry channels that accelerate fault isolation during commissioning.
What are the thermal characteristics integrators should know for HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-AA-FW?
The controller uses an internal blower to channel air over power electronics, maintaining stable junction temperatures under sustained duty. For best results, pair it with cabinet ventilation planning and monitor temperature trends during initial run-in to prevent thermal drift.
How does the controller’s mechanical footprint affect cabinet layout for HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-AA-FW?
Its compact form enables high-density rack mounting while leaving space for cable routing and service access. Account for blower intake and exhaust clearances during layout to prevent recirculation and to simplify maintenance access for front-mounted connectors.
What commissioning steps should be prioritized for HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-AA-FW?
Verify encoder wiring and signal quality, test blower performance under load and capture baseline parameter snapshots. Also document firmware version and network topology to allow consistent replication across production units and to accelerate troubleshooting.
How does the power architecture of HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-AA-FW support regenerative scenarios?
The drive supports shared DC bus arrangements that permit energy returned during braking to be reused by other drives. Proper DC bus sizing, protection and surge suppression are essential to safely manage regenerative energy peaks and preserve system stability.
Common Misspellings
HCS011EW0008A03BETECECNNAAFW
HCS01 1E W0008 A 03 B ET EC EC NN AA FW
hcs01.1e-w0006-a-02-b-et-ec-nn-s5-nn-fw
HCS1.1E-W0008-A-03-B-ET-EC-EC-NN-AA-FW
Internal Product Review
HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-AA-FW blends compact packaging with industrial-grade reliability, offering dual high-resolution encoder ports for precise feedback. Its internal blower thermal design keeps electronics within operating margins, simplifying cabinet integration and reducing thermal derating under sustained motion workloads.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-AA-FW.
Want to 
