HCS01.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW
HCS IndraDrive Controllers
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW from the HCS IndraDrive Controllers series is a high-precision HCS Drive Controller designed for seamless automation integration. This unit features a Mains Voltage range of 3 x AC 200...500 V ±10% and delivers a maximum Device Peak Current of 8 A. Built on Design Version 1, the controller requires that Firmware must be ordered as separate sub position to ensure up-to-date operational capabilities. Paired with the Control Section Design Type BASIC, it upholds a clear and consistent configuration interface.
Featuring a robust Cooling Method of internal air circulation via an integrated blower, the HCS controller maintains optimal thermal stability under continuous load. The front panel hosts dual high-performance encoder connections, including Interface 1 Type: Encoder IndraDyn Hiperface/EnDat 2.1/2.2 and Interface 2 Type: Encoder emulation, enabling direct feedback loops for synchronous motor control. A versatile Communication Interface: MultiEthernet port provides real-time data exchange and simplifies network topologies. The Power Supply Unit configuration supports both infeeding and feeded operation, allowing flexible power routing without external converters.
Engineered for reliability in industrial settings, the compact module carries an IP Rating: IP20 enclosure that protects against solid ingress while ensuring adequate ventilation. No additional design features are required, as denoted by the specification Other Design Features: None, which emphasizes the streamlined architecture of this controller. A clear Pairing Note: Paired with Control Section Design 'BASIC' (B) further assures compatibility with matching drive sections, reducing commissioning time and minimizing integration errors.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder emulation
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
8 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What is the retrofit benefit of the HCS01.1E-W0008-A-03-B-ET-EC-EM-NN-NN-FW?
Its compact size and encoder emulation make it ideal for replacing legacy drives without major cabinet redesign. The MultiEthernet interface eases connection to modern supervisory systems while preserving feedback continuity during sensor work.
How does encoder emulation help minimize downtime on the HCS01.1E-W0008-A-03-B-ET-EC-EM-NN-NN-FW?
Emulation provides synthetic feedback to allow limited supervised operation while a failed encoder is replaced, avoiding abrupt line stoppages. Clearly defined operating envelopes during emulation help maintain safety while preserving throughput.
What network planning best practices support the HCS01.1E-W0008-A-03-B-ET-EC-EM-NN-NN-FW deployment?
Allocate IPs, define VLANs and implement QoS for motion-critical packets to ensure deterministic performance. Use network monitoring to detect latency or packet loss that could affect synchronized motion.
What preventive maintenance routine preserves reliability of the HCS01.1E-W0008-A-03-B-ET-EC-EM-NN-NN-FW?
Regular blower inspections, encoder cable checks and grounding verification reduce the likelihood of thermal or signal-related failures. Record trends to identify aging components before they compromise production.
How does the HCS01.1E-W0008-A-03-B-ET-EC-EM-NN-NN-FW align with energy handling in retrofit scenarios?
The infeeding/feeded power architecture supports regenerative energy handling where the system permits, reducing brake resistor usage. Evaluate bus sharing and regenerative return capacity when integrating into existing power architectures.
Common Misspellings
HCS011EW0008A03BETECEMS4NNFW
HCS01 1E W0008 A 03 B ET EC EM S4 NN FW
hcs01.1e-w0006-a-02-e-s3-ec-nn-l4-nn-fw
HCS1.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW
Internal Product Review
HCS01.1E-W0008-A-03-B-ET-EC-EM-NN-NN-FW is a compact MultiEthernet-enabled converter with encoder emulation fallback for retrofit use. Its small footprint and feedback continuity features support tight cabinet layouts and predictable maintenance scheduling.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW.
Want to 
