HCS01.1E-W0008-A-03-B-ET-EC-EM-SB-NN-FW
HCS IndraDrive Controllers
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-EM-SB-NN-FW from the HCS IndraDrive Controllers is a compact drive controller in the HCS Drive Controller product type and part of the HCS Compact Converter Series. It supports 3 x AC 200...500 V ±10% mains voltage, with a device peak current of 8 A and features a MultiEthernet communication interface. Cooling is handled by an air, internal (through integrated blower) system, and the unit is rated IP20. The control section design type is BASIC (paired with Control Section Design 'BASIC' (B)), and interfaces include encoder IndraDyn Hiperface/EnDat 2.1/2.2 and encoder emulation. Firmware must be ordered separately as a sub position per design version 1, and the power supply unit supports both infeeding and feeded modes. Other design features: None.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder emulation
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
8 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
How do dual feedback ports operate on the HCS01.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW?
Dual ports allow either redundant sensors for cross validation or parallel protocols for diverse encoder types, increasing resilience. Proper configuration enables fault detection and automatic fallback strategies to protect motion integrity.
What commissioning tests verify dual feedback behavior for the HCS01.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW?
Test scenarios should include simulated sensor failures, cross-check mismatch detection and validation of fallback switching. Document test outcomes and thresholds to ensure predictable behavior during real events.
How does the HCS01.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW support rapid fault isolation?
With dual channels and networked diagnostics, the drive can report which feedback channel is degraded and provide signal quality metrics. This accelerates targeted repairs by directing technicians to the specific faulted component.
What maintenance routines help sustain the HCS01.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW reliability?
Periodic inspection of encoder connectors, cable routing integrity and blower cleanliness are recommended. Collect operating trends to detect gradual degradation before it becomes critical.
How does MultiEthernet assist in managing dual feedback systems with the HCS01.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW?
MultiEthernet enables remote collection of encoder diagnostics and correlation with drive telemetry, simplifying root cause analysis. Centralized visibility reduces mean time to repair and supports data-driven maintenance decisions.
Common Misspellings
HCS011EW0008A03BETECEMSBNNFW
HCS01 1E W0008 A 03 B ET EC EM SB NN FW
hcs01.1e-w0006-a-02-e-s3-ec-nn-nn-aa-fw
HCS1.1E-W0008-A-03-B-ET-EC-EM-SB-NN-FW
Internal Product Review
Bosch Rexroth's HCS01.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW offers dual feedback and emulation for graceful degradation, minimizing downtime when primary sensors fail. It is ideal for lines where continuous throughput and non-disruptive maintenance are business priorities.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0008-A-03-B-ET-EC-EM-SB-NN-FW.
Want to 
