HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW
HCS IndraDrive Controllers
HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW, Bosch Rexroth Indramat, HCS IndraDrive Controllers delivers precision motion control in a compact footprint. This drive controller integrates seamlessly into automated systems, providing robust performance in demanding applications. Designed for modular assembly, it supports flexible expansions and quick field upgrades. Its streamlined enclosure ensures efficient spatial utilization in high-density control cabinets.
Engineered around the Line Series HCS01 platform, the unit accepts a wide Mains Voltage of 3 x AC 200…500 V ±10% and delivers a Device Peak Current of 8 A for dynamic load demands. Communication is handled via a high-speed Communication Interface supporting MultiEthernet, while the internal blower enforces Cooling Method with Air, internal (through integrated blower) for consistent thermal management. The Control Section Design Type is rated BASIC with a Design Version of 1, and the Power Supply Unit operates as both infeeding and feeded to streamline DC bus integration. An Interface 1 Type port accommodates Encoder IndraDyn Hiperface/EnDat 2.1/2.2 protocols, and the rugged IP Rating of IP20 safeguards sensitive electronics.
With firmware packaged separately («Firmware Order Note: Firmware must be ordered as separate sub position»), the controller adapts to evolving software requirements without hardware alterations. Its seamless native bus coupling and standardized interfaces accelerate commissioning and reduce wiring complexity. Ideal for mid-range axis drives, packaging lines, and multi-axis gantries, the HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW ensures unparalleled reliability and efficient integration into modern automation architectures.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
8 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
How should engineers plan cabinet layout for HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW?
Leave dedicated clearance for blower intake and exhaust, route encoder cables with strain relief and avoid placing high-heat devices adjacent to the drive. Thoughtful layout preserves airflow and eases service interventions.
What advantages does MultiEthernet provide for HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW?
MultiEthernet enables low-latency motion control and centralized diagnostics without additional protocol converters. Proper network design guarantees deterministic performance and simplifies remote troubleshooting.
What commissioning sequence is recommended for HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW?
Validate encoder wiring and signals first, then confirm thermal behavior at idle and under load and finally tune motion loops at reduced speeds before full-speed verification. Document parameters and test outcomes for reproducibility.
What maintenance tasks maintain encoder integrity for HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW?
Inspect connectors, verify cable shielding and grounding and run periodic signal quality checks recorded in logs. Early detection of cable wear prevents intermittent faults that degrade position control.
How should firmware be handled for HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW?
Order firmware as required, validate it on a test bench before production rollout and maintain a documented change history. This approach minimizes unexpected behavior from software changes and keeps units aligned.
Common Misspellings
HCS011EW0008A03BETECNNS4NNFW
HCS01 1E W0008 A 03 B ET EC NN S4 NN FW
hcs01.1e-w0008-a-03-a-cc-ec-nn-l4-nn-fw
HCS1.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW
Internal Product Review
HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW focuses on precision feedback, compact packaging and predictable thermal control delivered by the integrated blower. The product is mainly designed for cabinet-dense applications where encoder fidelity and service access are engineering priorities.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW.
Want to 
