HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-NW
HCS IndraDrive Controllers
The HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-NW from Bosch Rexroth Indramat features a HCS Drive Controller product type and an IP Rating of IP20. Part of the HCS IndraDrive Controllers series, it supports a mains voltage of 3 x AC 200...500 V ±10% and delivers a peak current of 8 A. The controller uses internal air cooling through an integrated blower and provides MultiEthernet communication.
It includes an encoder interface compatible with IndraDyn Hiperface/EnDat 2.1/2.2 and lacks a secondary interface, belonging to line series HCS01. It operates with an infeeding/feeded power supply unit. Version 1 design is paired with Control Section Design 'BASIC'.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
8 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What encoder interface does HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-NW use?
This model supports IndraDyn Hiperface/EnDat encoder protocols that provide high-resolution position feedback and diagnostic channels. The interface allows precise loop tuning and detailed signal quality information, which helps engineers reduce settling times and maintain repeatable positioning.
What does the IP rating imply for HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-NW deployment?
An IP20 enclosure rating indicates suitability for indoor cabinet installation, protecting against accidental contact and large particles only. In dusty, wet, or washdown areas, install the drive within a sealed or filtered enclosure to prevent ingress that could impair the blower and electronics.
How does the power supply architecture affect system design with HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-NW?
The infeeding/feeded power supply capability allows the device to return regenerative energy to a shared DC bus or accept feed-in energy depending on system topology. This reduces reliance on dissipative braking and enables more efficient energy usage in cyclic motion profiles when bus sizing is designed accordingly.
What commissioning checks are recommended for HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-NW?
Validate encoder signal integrity, confirm blower airflow and cabinet ventilation and verify network packet timing for motion commands before full-speed commissioning. Document parameter baselines and safety interlocks to expedite future troubleshooting and maintain reproducible setups.
Which maintenance actions prolong service life of HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-NW?
Regular blower inspection, filter cleaning, encoder cable checks and firmware version control are essential to prevent intermittent faults. Proactive trending of temperature, current and encoder error counts enables condition-based maintenance and reduces unplanned downtime.
Common Misspellings
HCS011EW0008A03BETECNNS5NNNW
HCS01 1E W0008 A 03 B ET EC NN S5 NN NW
hcs01.1e-w0008-a-03-a-cc-ec-pb-l3-nn-fw
HCS1.1E-W0008-A-03-B-ET-EC-NN-S5-NN-NW
Internal Product Review
HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-NW delivers predictable high performance with a high-fidelity Hiperface/EnDat encoder interface, enabling tight position control for indexing and gantry axes. Its compact blower-cooled design supports dense cabinet layouts while minimizing maintenance overhead in continuous production.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-NW.
Want to 
