HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW

HCS IndraDrive Controllers

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW drive controller from Bosch Rexroth Indramat is part of the HCS IndraDrive Controllers series. It features internal air cooling via an integrated blower, an IP20 rating, MultiEthernet interface and runs on 3x AC 200–500 V. It supports IndraDyn Hiperface/EnDat encoder and PROFIBUS interfaces. Firmware must be ordered separately and the unit pairs with a BASIC control section design.

Technical Specifications

Communication Interface
MultiEthernet

Pairing Note
Paired with Control Section Design 'BASIC' (B)

Control Section Design Type
BASIC

Cooling Method
Air, internal (through integrated blower)

IP Rating
IP20

Design Version
1

Firmware Order Note
Firmware must be ordered as separate sub position

Other Design Features
None

Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2

Interface 2 Type
PROFIBUS

Line Series
HCS01

Mains Voltage
3 x AC 200...500 V ±10%

Device Peak Current
8 A

Power Supply Unit
Infeeding / Feeded

Product Type
HCS Drive Controller

Frequently Asked Questions

How does HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW balance legacy and modern networks?

By offering PROFIBUS for legacy device compatibility and MultiEthernet for modern telemetry, it provides a bridge during migration phases. This reduces retrofit cost and preserves investment in existing fieldbus infrastructures.

What commissioning sequence reduces risk for HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW?

Validate encoder signals, check communication links on both PROFIBUS and Ethernet, confirm blower operation, then perform low-speed motion testing. Recording baseline settings and test results ensures reproducible deployments and eases future support.

How does infeeding/feeded capability affect regenerative energy handling on HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW?

The power topology allows regenerative energy to flow back to the DC bus or be shared among feeds, enabling energy reuse when system architecture supports it. Correct bus sizing and protection prevent overvoltage during peak regenerative events.

What maintenance practices protect encoder signal integrity for HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW?

Use shielded cables, secure connectors and perform periodic continuity and insulation checks to preempt intermittent faults. Trend encoder error counts and replace aging cable harnesses proactively to avoid production impacts.

How should firmware be managed for HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW fleets?

Keep a validated firmware repository, test updates on a staging machine reflecting production loads and perform controlled rollouts with rollback images. This reduces the risk of software regressions and ensures operational continuity.

Common Misspellings

Internal Product Review

Indramat's HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW simply combines PROFINET-level diagnostics over PROFIBUS compatibility with efficient blower cooling to support mixed network architectures. The unit targets systems where legacy fieldbus support and modern telemetry must coexist without redesigning cabinets.