HCS01.1E-W0008-A-03-E-S3-EC-EP-L3-NN-FW

HCS IndraDrive Controllers

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The HCS01.1E-W0008-A-03-E-S3-EC-EP-L3-NN-FW drive controller from Bosch Rexroth Indramat’s HCS IndraDrive Controllers series supports 3×AC 200–500 V input and features an STO safety interface. It employs internal air cooling via an integrated blower, has IP20 protection, uses SERCOS III communication, and delivers up to 8 A peak current. This ECONOMY version pairs with section ‘E’, supports Hiperface and EnDat encoders, and offers 14-bit 10 V analog input. The module includes eight digital inputs and requires firmware ordered separately.

Technical Specifications

Communication Interface
SERCOS III

Pairing Note
Paired with Control Section Design 'ECONOMY' (E)

Control Section Design Type
ECONOMY

Cooling Method
Air, internal (through integrated blower)

IP Rating
IP20

Design Version
1

Firmware Order Note
Firmware must be ordered as separate sub position

Other Design Features
None

Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2

Safety Interface
STO (Safe Torque Off)

Line Series
HCS01

Mains Voltage
3 x AC 200...500 V ±10%

Device Peak Current
8 A

Power Supply Unit
Infeeding / Feeded

Product Type
HCS Drive Controller

Frequently Asked Questions

How does the ECONOMY control section affect parameter availability on HCS01.1E-W0008-A-03-E-S3-EC-EP-L3-NN-FW?

The ECONOMY section provides a curated set of essential parameters to simplify integration and reduce configuration complexity. It’s ideal for applications where a lean feature set is preferred for cost-effective deployment and easier long-term maintenance.

Which encoder interfaces are supported by HCS01.1E-W0008-A-03-E-S3-EC-EP-L3-NN-FW?

The controller supports IndraDyn Hiperface and EnDat encoder interfaces, enabling accurate position feedback and detailed diagnostics for loop tuning. This makes it suitable for applications requiring deterministic timing along with high positional accuracy.

How should thermal performance be validated for HCS01.1E-W0008-A-03-E-S3-EC-EP-L3-NN-FW?

Validate blower airflow and cabinet ventilation at representative duty cycles and log thermal behavior under continuous operation. Thermal trend data helps predict component aging and informs preventive maintenance schedules.

What commissioning steps ensure SERCOS III reliability for HCS01.1E-W0008-A-03-E-S3-EC-EP-L3-NN-FW?

Verify network topology, cable quality and node addressing; then run synchronization tests under real-life motion profiles to confirm deterministic packet timing. Record results and use proper shielding and grounding to minimize electromagnetic interference that can disturb SERCOS signals.

How should firmware changes be controlled for HCS01.1E-W0008-A-03-E-S3-EC-EP-L3-NN-FW?

Stage firmware updates in a SERCOS test bench to validate network interactions and motion determinism before production rollout. Maintain a change log and rollback images to restore known good configurations quickly if new firmware causes issues.

Common Misspellings

Internal Product Review

HCS01.1E-W0008-A-03-E-S3-EC-EP-L3-NN-FW is a model that provides optimal results. It utilises SERCOS III deterministic communication to achieve tight axis synchronization for high-speed coordination tasks. Paired with an ECONOMY control section and STO safety, the controller balances cost-effective integration with real-time motion determinism.