HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW
HCS IndraDrive Controllers
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW from the HCS IndraDrive Controllers series is a versatile compact converter designed for industrial drive applications. It operates on 3 x AC 200...500 V ±10% mains voltage with a device peak current of 8 A, and employs an integrated blower for internal air cooling, achieving IP20 protection. Communication is provided via SERCOS III, while the encoder interface supports IndraDyn Hiperface/EnDat 2.1/2.2. The control section follows the ECONOMY design (E) in design version 1, paired accordingly, with firmware ordered as a separate sub position. Featuring an infeeding/feeded power supply unit and omitting a safety interface, this HCS Drive Controller delivers reliable performance without additional design features.
Technical Specifications
Communication Interface
SERCOS III
Pairing Note
Paired with Control Section Design 'ECONOMY' (E)
Control Section Design Type
ECONOMY
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Safety Interface
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
8 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What deterministic benefits does SERCOS III provide for HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW?
SERCOS III provides cycle-synchronous communication and deterministic timing, enabling precisely coordinated multi-axis motion with minimal jitter. This is essential for high-speed assembly applications where tight synchronization reduces mechanical stress and improves product quality.
How does the ECONOMY pairing influence system setup for HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW?
The ECONOMY pairing limits parameter exposure to essential controls, simplifying initial setup and ongoing maintenance. This reduces configuration errors and speeds up installations where advanced features are not required.
How should integrators verify thermal behavior for HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW?
Conduct thermal runs at representative loads to confirm blower effectiveness and cabinet ventilation sufficiency and log temperature trends for analysis. Regular blower inspections and airflow checks prevent unexpected thermal derating during production.
What commissioning checks are critical for SERCOS III on HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW?
Validate cable quality and topology, confirm node synchronization under load and measure packet jitter to ensure network determinism. Proper shielding and grounding are essential to maintain signal integrity in electrically noisy manufacturing environments.
How should firmware lifecycle be managed for HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW?
Validate firmware on a SERCOS test bench replicating production cycles, keep a repository of approved images and perform staged rollouts with rollback plans. Proper firmware control ensures consistent behavior across installations and reduces integration risk.
Common Misspellings
HCS011EW0008A03ES3ECEPNNNNFW
HCS01 1E W0008 A 03 E S3 EC EP NN NN FW
hcs01.1e-w0008-a-03-a-et-ec-em-l4-nn-fw
HCS1.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW
Internal Product Review
Indramat's HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW is a very in demand model that delivers deterministic SERCOS III timing for coordinated multi-axis systems while using an ECONOMY control section to keep commissioning straightforward. The compact blower-cooled form factor makes it practical for dense cabinets where tight synchronization is required.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW.
Want to 
