1-888-551-3082 | 1-919-443-0207 sales@indramat-usa.com

HCS01.1E-W0009-A-02-A-CC-EC-ET-L4-NN-FW

HCS IndraDrive Controllers

  In-Stock, Ships 3-5 Days
Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping
Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping
The HCS01.1E-W0009-A-02-A-CC-EC-ET-L4-NN-FW drive controller is manufactured by Bosch Rexroth Indramat. Part of the HCS IndraDrive Controllers series, it supports SERCOS III master communication. It features internal blower air cooling and STO safe torque off safety interface. It runs on 3x AC 110–230 V and delivers a peak current of 9 A.

Technical Specifications

Communication Interface
SERCOS III master (cross communication)

Pairing Note
Paired with Control Section Design 'ADVANCED' (A)

Control Section Design Type
ADVANCED

Cooling Method
Air, internal (through integrated blower)

IP Rating
IP20

Design Version
1

Other Design Features
None

Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2

Interface 2 Type
MultiEthernet

Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)

Line Series
HCS01

Mains Voltage
3 x AC 110...230 V ±10%

Device Peak Current
9 A

Power Supply Unit
Infeeding / Feeded

Product Type
HCS Drive Controller

How does SBC complement STO of HCS01.1E-W0009-A-02-A-CC-EC-ET-L4-NN-FW?

SBC commands a brake actuator for mechanical holding while STO removes torque, providing controlled deceleration and secure hold.

How does dual encoder connectivity of HCS01.1E-W0009-A-02-A-CC-EC-ET-L4-NN-FW support redundancy?

Dual channels implement redundant feedback schemes or support different encoder types, minimizing single-point failures.

What are the thermal planning steps of HCS01.1E-W0009-A-02-A-CC-EC-ET-L4-NN-FW?

Reserve intake/exhaust clearance, avoid mounting hot components near blower intakes and validate thermal performance under full duty.

Which encoder protocols does this model HCS01.1E-W0009-A-02-A-CC-EC-ET-L4-NN-FW accept?

It accepts IndraDyn Hiperface and EnDat protocols, enabling high-resolution feedback and diagnostics.

How should regenerative energy be handled by HCS01.1E-W0009-A-02-A-CC-EC-ET-L4-NN-FW?

Use the infeeding/feeded power unit to return energy to the DC bus or other drives; ensure protective circuits and bus sizing are adequate.

HCS011EW0009A02ACCECETL4NNFW

HCS01 1E W0009 A 02 A CC EC ET L4 NN FW

hcs01.1e-w0008-a-03-b-et-ec-ec-l3-nn-nw

HCS1.1E-W0009-A-02-A-CC-EC-ET-L4-NN-FW

Internal Product Review

Bosch Rexroth's HCS01.1E-W0009-A-02-A-CC-EC-ET-L4-NN-FW is designed for synchronized consistent production with optimal results. This model features dual encoder connections and MultiEthernet for supervisory use, with firmware ordered as a separate sub-position.

Warranty

1-year-warranty
Indramat USA 1 Year Warranty

Repair

product repair We offer a repair service for the HCS01.1E-W0009-A-02-A-CC-EC-ET-L4-NN-FW.
Indramat Is Trusted By
motion-industries-logo
3m-logo
IBM-logo
GexPro-logo
caterpillar-logo
nasa-logo
ford-logo
vallen-logo