The Bosch Rexroth Indramat HCS01.1E-W0009-A-02-E-S3-EC-NN-L4-NN-FW is a member of the HCS IndraDrive Controllers series, designed for precision motion control in automated industrial environments. Manufactured by Bosch Rexroth Indramat, this HCS Drive Controller operates on a 3 x AC 110...230 V ±10% mains voltage and delivers an output current of 3A. It features a robust IP20 enclosure rating and an internal air cooling system via an integrated blower, ensuring reliable temperature management in confined control cabinets.
At its core, the controller employs a SERCOS III communication interface and an ECONOMY control section design type to balance performance with cost efficiency. Safety is built in through STO (Safe Torque Off) and SBC (Safe Brake Control) interfaces, enabling integration into safety circuits without external relay modules. The device peak current of 9 A supports dynamic loads, while the rated input current options of 5.0A or 2.3A allow flexible power management. Encoder feedback is supported via IndraDyn Hiperface or EnDat 2.1/2.2 protocols, ensuring precise positioning in high-performance applications.
Additional features include a compact weight of 0.72Kg and permissible ambient temperature operation from 0 to 40°C, facilitating installation in a range of factory settings. The controller’s design version is 1, and firmware must be ordered separately, offering upgradability over its lifecycle. Mounting is specified at position G1, and the feed-in/feeded power supply unit enhances installation versatility. With its balanced efficiency, built-in safety functions, and compatibility with standard encoder interfaces, this drive controller delivers dependable performance and streamlined integration for modern automation systems.
Communication Interface
SERCOS III
Control Section Design Type
ECONOMY
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Firmware Order Note
Firmware must be ordered as separate sub position
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Not equipped
Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
9 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Rated input current
5.0 or 2.3A
Allowed mounting position
G1
Weight
0.72Kg
Permissible ambient temperature range
0 to 400C
Output current
3A